I tried #22222 in this dc430, there is no Auditron selection, only lets me reset the #22222 password.
Type: Posts; User: joetennisjoe
I tried #22222 in this dc430, there is no Auditron selection, only lets me reset the #22222 password.
I also did #11, but only allow some settings to be changed, not the user password.
I did the #22222, that only would let change the tech mode password, not the user password on display.
A customer bought a xerox dc 430 at a auction, display is asking for password to copy. I tried to reset in tech mode, but not find any entries to reset the password or disable the password entry.
...
i am looking for automatic paper select from hand placement on platen glass, so everytime you put a original you don't have to move the button to letter.
on the canon 1600 image runner, where do I select aps(automatic paper select) for hand placed originals? I could not find it in the operator select mode, is it in the tech mode and if so where in...
the bicu is that the display assembly or a main pcb in the back?
does anybody have a copy of ricoh 1022 service manual, especially wire diagram?
joe balderas
the low voltage power supply board has the fuses, which I checked, all fuses were intact, no output and burnt components was why I replaced the low voltage power supply, which now I have output, but...
ricoh 1022 has no power on display or green light on display on/off switch.There is power coming from outlet, power to low voltage power supply, but no low voltage output, so I replaced low voltage...
I am working on a canon ICD 760 small copier, I thought I had resolved the problem. paper pick up is not consistent, I replaced the pick up half moon rollers, and pick up solenoid, worked for a...
thanks, the problem was the thermoswitch.
joe
I have the same code on the same copier h4-01, had changed the upper fixing roller, both thermistors had been replaced 2 months ago, I think it might be the thermoswitch, the lamps do not come on,...
On sharp 287 I got a H4-01, I believe that it might be the thermoswitch, any other suggestions?
joe
I got a E803, the manual indicates that it is either the scanner lamp or low voltage power supply. As soon as the machine is turned on, the scanner lamp does not light up at all, the error code...
Does anybody have the procedure step for drum, starter, and resetting the drum count on this copier?