Search:

Title says it all. Machine is in a school. According to teachers, it was working until it wasn't. Just sits there with green main power light blinking on and off. Turning main switch off, unplugging...

Think I know the answer is no but will a RSPF off a MX-M266 work on a MX-M264? They are different options but the machines ae essentially the same. Customer has a 264 and don't have another 264 to...

Second the SD card. Had a 264, previous model, with same issue. SD card fixed it.

agree with OEM1 Fuser roller

Hello all. Got a MX-M550N that's 12 years old with 3.2M on the clock. All of a sudden tray 1 will not feed. Paper is picked up ok makes it part way out of tray to between feed and counter roller and...

Not trolling here. Genuinely curious as we don't do a lot of scan to email. Why is this a big no no?

Machine has been working fine for three years. No VOIP or special code to dial out. They plugged their old fax into the wall jack, the fax being used before getting the 283, and it works fine....

Customer called and and they had lost fax capability. Had a 283 with fax kit on it so took the kit and memory card down and installed the MX-FXX2 only first on the customer machine. Went to image...

Have a 264 being used as copier and printer. No fax or scanning. No HDD. SD card is going bad. Replacing it with new one ordered from Sharp tomorrow. Been reading the various threads on this subject....

Customer has a MX-5141 with around 90k black and 50k color. All supplies have plenty of life left. Machine was shipped to them from another office so it's not one they purchased from us. Don't know...

Customer called today that has a Sharp MX-M264 with MX-FX11 fax option. They said the machine will randomly dial a number on it's own. This has been going on for a week and they just decided to call...

And my bad. It was the AR-P21 kit not the MX-NSX1. Was doing it from memory and got the two confused.

That's what Sharp tech support said. lol

Think I know the answer to this but here goes. Customer has U version of AR-M355. Wants to make it networkable. I have a network expansion kit - MX-NSX1- network card, ROMs and HDD that was pulled...

I would try replacing the delivery turnover unit first. That is usually the culprit. Check the "fingers" on the reverse gate on the left door unit to make sure none are broken although if they are it...

Sorry for the delay in replying guys. What happened was similar to what happened in the quote above.

Installation manual says to remove toner and developer cartridges when transporting machine....

They were not installed. Installation manual says remove tone and developer cartridges during transport which we did.

Brand new machine. Installed two weeks ago. Now throwing F2-67 toner supply operation trouble (yellow). Customer was in middle of 100 sets of 4 pages run when code was thrown and cartridge ejected....

Customer is using genuine HP ink

Customer has one of these. Won't print in center of page. Prints on right and left margins ok. Center is blank. Cleaning printhead will let it work for short time then it goes back to not printing in...

Well let me update this. Went up and looked at machine week before last. When I arrived machine was working. Only thing was it had a message that the black toner was getting low. I should've left...

Have a machine throwing this code. Customer turned off and on as error help said. Did no good.

SM says replace LSU and if this doesn't fix replace engine board..

Replaced LSU a week ago. Was...

Winner!
Thanks so much for all replies.
(It drove me nuts as well. Why this would be a feature, or needed, is beyond me.)

Keyboard will not work. Or almost won't work. Numeric keys, menu, enter, exposure, magnification, mode switch won't work. Print button only works if you press and press and press, then only works if...

Does anyone have the part # for the scanner? Section 16 item 15 of parts guide. Not listed but shown in picture. Price would be helpful as well. Have a machine that needs a new one. Such a low cost...