canon 2520 print showing dotted spot on the paper
i had change the drum , pcr (charging roller), drum blade, cleaning the HVT card
but the issue is same till now
please find the attachment
please...
Type: Posts; User: pulkit jain
canon 2520 print showing dotted spot on the paper
i had change the drum , pcr (charging roller), drum blade, cleaning the HVT card
but the issue is same till now
please find the attachment
please...
can anyone inform me where should i find ross in ir 2520
cannon ir 2520 print is not coming good i had change the toner, hvt card, drum, drum blade, pcr roler, whoe drum unit and i had changed the whole developing unit and all the clutches and i had the...
sir i am facing the problem that my ir 2520 is not giving the contrast print in rainy days what type special mode i use to make the print good
please tell me the function of special modes in...
when i turn it by hand it shows lines which used to print on the paper but with lot of attempt the lines on the mag rod removes and the print comes out properly but after 100 copies it again shows...
the magnet rod is getting more toner on it and i was thinking that it is because of cleaning blade
ir 2520 printout is not good it shows black lines on the paper it is in views the fault of developing unit kindly go through the attachment and guide me how to solve this problem it is urgent
ir 2318 shows load plain a4 paper and jams in fixing unit i had upload the attachments
in my view it is problem with pressure roller or Teflon the contact between teflon and pressure roller is...
ir 2520 print light from top of the page i found that the developing unit part no. (19 FM3-9265-000 1 BLADE ASSEMBLY) becomes faulty i try to adjust the position of this blade but i am not able to...
could you please specify the image or part no. of the gear with cut!!!!!!!!!!!
ir 2318 paper jam in stack bypass
i saw that the stack bypass rubber roller stops and paper jams
is the rubber roller faulty because of stack bypass clutch or any other gear!!!!!!!!!!!!!
mf4320d printer is displaying set paper again and set toner again
this problem occurs when a paper jam in the printer and i had removed it but then it shown this error
what to do!!!!!!!!
i think that your answer is quite good
i had change the registration clutch but i works for few copies or prints
one more question
this problem can occurs because of fixing unit
what paper size is selected - A4
what location is paper selected from - both drawer and stack bypass
is this message to load A4 show when u print from other sizes ? No, but it shows to load...
it shows when paper jam in fixing unit and also when it pass out from fixing unit
in ir 2318 machine shows an error of "LOAD PLAIN A4 SIZE PAPER"
i had -
1.clean the clutches
2.change the rubber rolle
3.paper quality is all right
4.checkout most of the parts
now i have...
in ir2318 when paper moving from ADF then the ADF crushes the paper but not not stops moving
there is no error code
IN MF4412 it shows error code e202-0002 how to solve it!
yes voltage supply is all right but major problem in Teflon based machines is that they do not fix the toner as like the heat roll based machines
what is the value on print numeric # 01
because the toner is not fixing after trying a lot of efforts
please guide me in ir2520 if i use temperature at 0 value regularly then there will be a bad effect on machine gear or not, that is print numeric 062 value at 0 and 063 also at 0
and what is the...
is the slip and fold in the paper can happen because of the fault by FU8-0576-000 GEAR, 18T/25T
in ir 2520 paper got slip and fold in A4R mode from both drawer and stack bypass is this can happened because of duplexing clutch not working properly or because of FM3-9293-000 MULTI PAPER PICK-UP...
could i know the reason why the engineers of copytechnet not responding for my problem or late responding for the problems
is this the part number for all clutch FK2-9154---all same Part #
if no then please send me the part numbers of all clutch