clean the mirror in the scanner. Replace scanner and/or cable. Has to be that or board.
Type: Posts; User: dan7777
clean the mirror in the scanner. Replace scanner and/or cable. Has to be that or board.
Just had one the other day software fixed a year ago but not this time. Had another used machine and took main board with the chips it had on it to fix. There are pins (more like solder joint) you...
I would think so. The I (will not let me put small I in) means it does not need a scan license. Not sure what would happen if it can not scan but I doubt the info is on the hard drive.
On your test chart 10 it looks like the cyan is missing unless you turned it off. There is a coupler at the end of the cyan developer that needs a new one. X shaped. New style has a pin. Old style is...
I have had drums make that noise. You just have to find which one.
The other answers are correct. There is a mod kit on the side that has metal posts instead of the plastic round idlers. If you have any C5xxx you will have that code. First I make sure the new style...
I think he was correct. I had to replace one. Hard to find part but he showed it. A little bit of a pain. If you have manual follow instructions.
The reverse assembly on most do that. FM1-L219-010 on that one. But on a new one I would pull it. Takes about a half an hour if you have done it before. I used to replace that and reverse door...
Things to try. Try turning off ECM in receive. Ask if they have VOIP. They will not know and need to ask Comcast. If it starts to receive and then goes away most likely. Then try turning to lowest...
Try going into service mode to clear and clear password. Default is 7654321, 7654321. Then it will ask you to change it. There is a way to go to settings and change it but you need a password :D.
Thanks.
thank you. That is really useful information. I guess I will use usage count on printers that have it. I have always used configuration as I use that for pm kits.
That sounds like it is the toner. I have heard stories of people filling oem bottles with waste toner or toner from a printer. Start with a new developer, new oem bottle. Vacuum the toner hopper....
Don't forget the drum ground. I think it may go light when you loose ground. Dark could be HVT or maybe a cracked charge connecter. When you loose all charge it would be black. I am just throwing...
Restart may be ram. I was thinking HD until you said that. Seems like you could boot to HD, format and reload software but I have had computers (was ram) and one Canon that did that but it would...
We are having different pages meter counts so my boss sent me out to get meter counts. He asked for configuration pages and usage page which it looks like only newer ones have usage page. He found...
If you put a new scanner in you could try the flat cable to it. Do the white level adjustment (I think there are 4).
The manual mentioned on the dc controller board you should do a backup and restore. Could have firmware issues with main board but does not talk about main board being an issue. I update with usb and...
Looks like from the manual E110 is the laser scanner you swapped. If you were working around main controller check J8142 and make sure it is seated right. Canon knowledge base mentioned a switch by...
Not a part with a number. You have to order the cartridge. I keep one in my car stock. I do not know how they knock that part out. It can be easy to replace staples if you know what you are doing but...
One of the rollers that is belt driven in 2/3 unit I have found the gear skips on the belt. Sometimes the shaft is out but most times not. I do not know if the belt stretches or what the issue is. I...
Sometimes in this series (1730, 400,500) the size detect wire gets broken and will not show paper. Each cassette has one and you can swap them to check. Seems like it is flag on paper detect. I keep...
In the back. Two screws. Easy. Size detect assembly.
E110 is in scanner or cable. check it is not hitting anything. I had one a cover got put on wrong during install.
Make sure the guide on the fixing film is installed and you can get it in upside down.