can anyone point me in the direction of the latest firmware for this model?
Type: Posts; User: WaveyDavey
can anyone point me in the direction of the latest firmware for this model?
if its done 2m then its not far off its expected product life
as said above its not for the faint hearted and also not easy on your pocket
looks like non oem toner to me :)
The issue is that if you change any settings within the driver properties to booklet or staple etc via the print dialogue within Indesign or Illustrator they are ignored and the driver outputs at...
I have one on my desk the same. Persoanlly thought that the one I have got damaged slightly by an over enthusiastic field tech but listening to this list I guess its common place.
Solution ID
TAUS0645970EN00 Solution Usage 0
Description
How to troubleshoot C-1039 errors.
Solution
Perform the following:
1. Check connector CN39 located on the right side of the copier,...
if its starter dropping rather than toner (check if its magnetic) then there is a mod thats available but will require a major strip of the machine. or a mdified dev unit.
you will need the system dvd and the user dvd to do a complete re-install.
bah not quick enough :)
if its had a key counter fitted and then removed there will be a small jumper that needs to go back into the loom.
the IC303/305 etc are shipped with recovery dvd's check your pack that came with the device.
latest fix for blade flip in the 6500 is to fit the C500 blades with the small plastic holders from the C500 drum unit. all out of stock of course :(
the drive coupling can stick in, may just need a push from the rear and/or losen screws holding surround assy and it will locate
IIRC its been a while tho !
we have a seperate contract that customers can sign to opt out of if they wish.
its based on a quarterly charge and increases if the machine has extra options fitted to it, ie fax IOptions etc
what he said is correct, rear cover interlock not made prevents engine predrive and therefore will not reset toner empty
lots of differences tbh but if you are using the PS driver you should be able to utilize icc profiles for the device and get the output you require. if its not been setup correctly it could look...
simple answer to the first question is no unfortunatly
the best way to do it is to have 1 user that has write access to the folders, setup for the device and nothing else. therefore you have the...
bugger, too old :(
Cover Hampshire, Sussex must have experience and no baggage
connectivity a must
apply for further details via PM
thanks
just reading this I was going to suggest the NV ram on its own
seen NVRam cause this before
We see this day in day out, the way I see it is that the manufacturers are shafting the dealers, if they can afford to do OGC pricing for the government then they can do it for all and they are. the...
PSWC (Pagescope web connection) should be enabled by default and yes it is the ip of the engine the one you print to.
there can be several reasons for this not working external or internal to the...
Make sure you plug the cross over into the engine port not the LAN
make your own minds up
see attached said memo
its just a message threatening anyone who resets fuser units that their life may be in danger.