Looks like someone has changed the generic password from Fiery.1 on my EX12, doc12 fiery server. The screen says it has level 3 software, and I think a software reload is required to get back to the...
Type: Posts; User: xtrain
Looks like someone has changed the generic password from Fiery.1 on my EX12, doc12 fiery server. The screen says it has level 3 software, and I think a software reload is required to get back to the...
Have a newer type Fiery for my doc 12 and cannot get into diagnostics like the older Fiery, by holding start and number 4. I think the generic password of fiery.1 has been changed, as I cannot...
Looking for a 121K17940 Developer position drive clutch. Mine is noisy and has slight vibration. Hopefully I can find it in the USA to save shipping cost.
Sold last unit. Now retired.
Sold last unit. Now retired.
A guy just north of you is looking for a Versant 80. He is in Douglas Georgia, Call 912-384-2008, ask for Doug.
I have worked with Jeffrey Bender for over 20 years, and he is an honest dealer. Never has he screwed me on a deal, and always pays quickly.
D.L.
Xtrain Inc.
Sold the Lenovo T61, still have the newer Lenovo T420. This baby is really fast, Intel I 5 vs. Core 2 duo in the older units.
Priced low for quick sale.
Customer mistakenly reset NVM,s and lost Pro Finisher on next boot. Control panel indicated non customer mode. I had him do GP29, Restore Customer Mode. After setting NVM 616-014 to 2, close DC131,...
GP3 shows market region in edoc. Letters preceding serial number show build location either Malasia or Singapore, and what machine has installed at factory. XE Prefix is for Europe. See General...
They have it at service-manual.net for a 1500 page PDF download for $12.99.
Follow GP17 in the WC5687 Family service manual. It tells how to reset HFSI parts.
My service manual says to check/clean ROS window, check 1st. BTR in transfer belt for continuity and voltage, Developer bias contactor spring and voltage, and clean the ADC sensor. Hope this helps.
Try finding them on xertech.org . They work on the larger machines.
My service manual says enter diagnostics, # key + access key. Enter pin 1934, hit enter. Select service info window, hfsi, then hfsi table. The fuser and xerographic module are set to replace after...
The 061-310 RAP says to check connectors on the (Y/M) ROS, and the MCU PWB. If they are ok, replace (Y/M) ROS, 062K17306, or MCU PWB, 960K18011.
Send me an email and I will send you the latest DC8000 SNAPS. xtraininc@cableone.net
Just found a fast PWS laptop, Lenovo T420, Intel I 5 CPU, 6 GB. Ram, Windows 7, PWS 11.0. I can load any EDOC or diagnostics needed. I still have the old standby PWS laptop, Lenovo T61, Dual Core...
I found it at service-manual.net as a PDF download, 1176 pages, $12.99. I also have it as an edoc on a flash drive with over 200 edocs. If you have a PWS and want info, email me at...
My EDOC says 08-100 is a wait sensor jam, 10-102 is a fuser exit jam. I would suggest you follow the RAP to fix these problems.
I would try the USB Key port on machine, other end to any USB port on the laptop. If this does not work, try the other USB printer port on the machine.
Obviously, you don't have the EDOC on your PWS laptop, so you can download a PDF file called WC5687 Family which includes the WC5655, from service-manual.net, 2320 pages, for $12.99.
If you have a PWS laptop, look in the WC5687 Family EDOC, section 6, GP 5. It says to install the USB connector to a USB port on laptop, other end to SIP module. I am not familiar with this machine,...
I found a fast PWS laptop, Lenovo T420, Intel I 5 CPU, 6 gb. ram, windows 7, PWS 11.0, and still have the old standby, T61, dual core duo, 6 gb. ram, win 7, PWS 11.0. Both available for quick sale....
If you have a PWS laptop with GSN password that has or will expire soon, I have a PWS Crack software that will enable non-expiring, permanent password. This works for XP and Win 7. email me at...