Thanks for the reply mark,i suppose its a good time to tell that the machine is on 7 million clicks(forgot to mention it sorry)
Type: Posts; User: DigiMan
Thanks for the reply mark,i suppose its a good time to tell that the machine is on 7 million clicks(forgot to mention it sorry)
Yes it codes out on every paper,to be honest i didnt check the loop because we never had any issues with it..by the way that motor that is supposedly at fault i swapped it out from another identical...
Hey mark thanks for the reply!
Primarily its always printing simplex due to the nature of the work but i tried some duplex a3,a4 from the trays and the bypass and its working fine.If you try it...
Goodmorning gentlemen
As per the title i have a machine giving me this error code(Paper feed motor 1) but under specific circumstances.The machine is working usually with a paper 330x760 feeded from...
Goodmorning everyone
Just posted a thread on one of the KM subforums and for some reason its in printable view?
Did i do something wrong as its the first time happening to me.
Thanks
Goodmorning everyone
Would anyone happen to know if you can lock out the Output Method in the printing preferences of this model?In the 224e series its quite easy but in this model im having a bit...
Hey everyone thanks for the replies!
Long story short i wrestled with it for 4 days while doing everything you guys mentioned(all the parts were new)but it got the better of me,still after...
Thnks copyman but i probably should have mentioned it that prior to changing anything i was able to get in service mode through the trouble reset and tried the things you mentioned.
Goodmorning everyone
Got my hands on a c554e the other day with the issue of when you boot it up it will restart once at 2 pillars then proceed to stay on 4? pillars with the konica minolta logo...
Good question actually and sorry for not mentioning it,everything from the spare machine was stripped down so i dont know...but between boards i found some differences in the logical switches so im...
Goodmorning everyone
As per the title i have a c220 who started getting stuck in the hourglass and a few times that it started it popped C-C171.I tried to update the firmware but i got an almost...
Hey thanks for the reply!Could you be a bit more specific?What gear unit are you refering to?Can you give me its part number or its exact name so i can look it up?
Goodmorning gentlemen
As the title says i have a C5501 with a persistent C-2840.The machine is pretty old but well maintenanced,she started popping C-2804 codes a couple of weeks
back and the...
Good morning gentlemen
As the title says im looking for an old OT-502(C6000/C7000) for purchase.Either new or used i dont mind,PM me for the details if anyone has anything available.
Cheers!
Thank you for your response
Its not overly used as ive seen these push numbers close to 2 million with proper care and maintenance but still replacing 3 Dev units/1 K Drum/1 ITB is just not worth...
Hello
Although the particular model is one of my favorites and im sure many techs would agree ,just the cost of replacing the developer units(which are not the toners by the way) in my opinion is...
How did i miss this damn,so many authentication setups for nothing,is this something new or was i completely oblivious to it(im guessing i was)?
Much appreciated tsb!(And for anyone wondering the procedure is the same indeed)
Much appreciated tsb but it was probably my fault since i wasnt clear on my point :cool:
What i mean is i need the installation procedure of the system software not the installation of the IC-415...
Good evening gents
Im trying to find the reinstallation procedure for a IC-415 system software mounted on a 1060L.Can anyone give a hand cause i cant find it in KM's Infohub(EU portal).
If the...
Whatever you are smoking i would like some too please,pm me for the details.
Goodmorning gentlemen
Yesterday a fellow tech went to remove some paper from a fs-612 attached to a c7000.Upon removing the papers he reconected the FS only to have it not been recognized by the...
Goodmorning everyone
Anyone knows if the parts of the 1050 specifically the cleaning unit parts(blade,toner brush etc)
are compatible from another model?
Thanks!
Damn you beat me to it!
Good evening gentlemen
Im having a hard time with these as their life expectancy is really erratic.We made another conversation in another thread but i wanted to ask do you guys get refunds on...