Yes Sir, I pulled the drive for feed and the exit unit, lubed all metal bushings out back together and no more noise! Thanks to all!
bill
Type: Posts; User: kmtech
Yes Sir, I pulled the drive for feed and the exit unit, lubed all metal bushings out back together and no more noise! Thanks to all!
bill
Thanks much, Lawrence, going out today and will check these offerings out.
Bill
Thanks Tmaged, i will check that.
Bill
I have a Chirping noise which sounds like its coming from the Drive motor, not sure, i know of the bulletin fix but would like some other input. Machine is KM 5052c
thanks in advance
Bill
does anyone know of a Compatible Charge roller or Kyocera 406c
Kyocera MC-5215 Main Charge Unit 302R693030,
thanks for that heads up!!
thats what i did, but just wonder what happened to cause this so as to avoid it happening again.
Bill
thanks for the quick respose
Problem with Developer setting in place properly, it goes in fine but the little button that engages the DV roller to the drum wont set.. dont under stand it???
thanks for the heads up!! I will check the site for the bulletin
Thanks !!!
does anyone know if these machines use the same transfer units? 5500i and 5501i Kyocera
this machine runs outta toner in the developer unit, without toner add light coming on! I have replaced Dev unit, still no luck, im starting to think Main board just wanted to get another opion....
Over loaded my butt again. I told customer i would do their Sharp, I need a fuser for machine, MX 2615N could someone know a wholesaler that would have a decent price on it. Its saying FK1,2, 3....
I tried to log in but the way its cycling i cant. power on the interrupt button blinks and it turns off and back on again.
any suggestions..
Thanks for the suggestions, I will try them and let you all know what it was
Bill
I picked this 3655< once the main switch is turned on it just keeps cycling on and then off. has anyone had this problem?
Thanks in advance
Bill
Does anyone know is the options interchangeable from one to the other? KM5500i / KM5501i
Thanks a great deal...
,
Funny, I noticed it tested ok on the web, but when i go to the machine I get a 1106 Error..
Hi All, I am setting up this M6526cdm to scan to email, trying to use Comcast server settings, tried every setting i could find for the server no luck. Has anyone set this machine up to scan to email...
Thanks to all of you that contributed, I check the chip, it was old. so i went to walmart got a 8 gigger and what do you know it worked.. thanks a great deal for all the effort..
Bill
I read that but it just would not run the backup firmware, I going to get a smaller usb, the one i used was 80gig. like i said earlier i tried to install the backup firmware and for all the listed...
Thanks a great deal.. I will check tomorrow, and get back at ya.
Thanks, for taking the time to help.. with the info i will maybe get this machine ready by Tus. Thanks.
Thanks much, I am indeed indebted to!! Save a lot of time do to the fact of the learning curve, it kinda seems it may have been done, I will check for the red mark!! I will follow up with the out...
just seeing if maybe the clicking is normal, you know how some have quirks!! It works fine but clicking, clicking .....