Sorry, see the solution done by mincopier.
Type: Posts; User: stephaneleclere
Sorry, see the solution done by mincopier.
Take a look at this post https://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/143406-disabling-paper-cut.html?highlight=sc637 and especially the solution done by Lagonda. it helps me...
+1 you have to put 2 washers between the connector and the mount plate of the finisher to improve the connection with copier.
I remember that I have replaced the main PWB to solve this problem...
Hello everybody, I have an error F4D6 on this printer immediately at start up. Service mode is unavailable and I don't find this error code in the service manual. Any help appreciated. Thanks.
Hello, did someone can tell me if it's possible to scan to a mail address with a systematic copy to another one stored in the address book.
I had a customer who wants to scan to differents address...
Problem solved! DC PWB changed and the copier is working fine now. Thank you all for your help.:):):)
You're right. 0 volt on CN 104-1. I order a new DC PWB. Thank you for the reply. I'll tell you if it's OK after replacement.
Hello, I have a Sharp MX-2310U that gives me an error E7-20. I've changed the LSU : same problem. I've changed the LSU mother board and code is still here.
Test failed on laser K in SIM 61.1 but I...
Hello mrwho,
did you tried to modify the margin settings in user tools?
Go to user tools than copier/document server features.
In edit page set front margin, back margin and 1sided to 2sided...
It seems to be a problem with the laser motor.
Good luck.