In my case the client fitted the wrong dispense assembly.
He fitted a d95 assembly to a d136.
Type: Posts; User: fatfingers73
In my case the client fitted the wrong dispense assembly.
He fitted a d95 assembly to a d136.
Thanks all.
SN did the trick.
What the complete SN as the password?
Thanks.
All,
Just replaced SBC PWB in a WorkCentre 5890i.
Now the deafult admin 1111 isn't working.
It's never been changed. Any ideas?
I'm onsite now.
Morning all,
Having issues with A5 on this Canon. The paper keeps trying to go over the top of the hot roller.
Any idea what could be causing this?
A4 will run all day long.
Fuser is on...
No I can't.
Forgot to add xerox also tried a new ess controller unit.
I'm thinking it might be MCU PWB.
Waiting for Xerox to call me back.
Thanks.
All,
I've got this fault on one of my V180s.
I escelated to Xerox for a site visit, and they asked me to replace 3 boards:
Power supply assy AC
LVPS
KIT AC assy
Hello,
My colleagues having the exact same issue on a 2100. Do you remember what the fix was?
He's on holiday now for 2 weeks so I'll have to pop back there.
Thanks :)
Thanks, all that's been replaced :)
I did yes. Going to order CRUM assy and MCU.
I was hoping someone has seen the fault where supplies status was black.
I've tried another LVPS and IOT PWB from another machine but with no juy.
...
Hi all,
I'm after some advice please.
Replaced dispense assembly. Reset code to 0 (762-130), but fault comes back instantly.
In supplies under status everything is blank? I've never had this...
Does anyone know the date this started?
I'm going through all my toners today and moving the bad ones to one side.
I know anything after 12th April 2021 should be ok, but I've got some dated...
Ok thanks for that.
Are you aware of any warranty returns procedure set up by Xerox?
Is there any update on this issue?
I'm still getting this problem on 2x V80s with toner dated Apr 21.
I've followed the full cleaning procedure to the letter.
Thanks all and have a good...
All,
I've got 2 cables snapped on T6. Is there anyway of disabling this tray so it doesn't try to life when I close it?
Then they can still use T7. I've got the option on the 2100 but can't see...
Hello,
I'm having trouble getting the icon to appear on this new install.
It's probably because I can't get into the printer registration screen.
Does anyone know what the password should be...
Afternoon all,
Having trouble with this code.
Tried transfer power pack, toner supply motor, cleaned dustproof glass and tried complete PCDU from another machine.
I'll get a couple of washed...
Thanks, you're correct. EFI confirmed yesterday. :)
Morning all,
Does anyone know if this can be used on a altalink C8155?
Or do I need EX-c C8100 fiery?
Many thanks :)
Yes but the one that works has the larger fiery, the other has the small piggyback type.
Morning all,
After some advice.
I have 2 V80s with identical SMB settings set up through the fiery.
One arrives at the destination fine, the other don't?
The one that don't arrive still...
Hello,
After some advice on this one. Getting terrible skew from these 2 trays.
All feed rollers new, and reg unit also new.
Tray 1 is fine.
Vertical transport seems fine.
That's the problem, it wont allow me to change these settings. It reverts straight back to these settings.
Yes it is a fiery.
Thanks.
Morning all,
Can anyone help with this please?
I'm unable to save any settings in the photo attached, and I'm getting the error above.
Would this be the ESS PWB?
Many thanks :)
I've found it for the D136, would that work?