I had the same issue with a C2003. Colors were good when making copies, but prints were off. Had to clear the printer memory and the colors were perfect.
Type: Posts; User: myxer1234
I had the same issue with a C2003. Colors were good when making copies, but prints were off. Had to clear the printer memory and the colors were perfect.
29079Check the tech bulletin for this issue. It involves a new kind of tension spring for holding the toner bottle
Replacing the fusing sleeve is the only thing that's worked for me.
I too have this problem with several machines. 9002, 6002, 7502. Ricoh is no help. Act like this is the first time they ever heard about it. Any help would be much appreciated. I also have done...
I replaced the ADF paper sensors and tightened the ADF transport belt but it still has the same issue. I can't duplicate the problem but SMC confirms 07 jam issue also.
I have the same issue on a MP 9002. I have replaced the torque limiters and most of the one way clutches with no luck. I have the paper feed sensors on order. I'll let you know if that helps.
Customer has issue with ADF. She says it will accordian fold the first document through the ADF often. Doesn't matter if it's 1 sheet or 50 sheets. These are just 20lb. paper, never been stapled. ...
Thanks for the advise. I was hoping to avoid replacing the BICU since this is a relatively new chargeable unit and this isn't the original problem he had. Touchy situation.
thanks for the comments but wouldn't the error follow the out of adjustment laser unit if you swap them?
After removing the laser to clean a toner spill I now get a SC 220-1 that I can't clear. Replaced the laser flat cable and swap lasers (they are the same). Any thoughts?
I have tried different feed rollers from a known good machine. The rollers turn both ways by hand with some resistence. its not a feed roller problem.
Checked feed rollers and they are the correct ones installed correctly. The shafts are actually turning the wrong way
Thanks for the advice. I don't think anyone change the feed roller but it's a lot easier to check than what I was going to do.
Hi Guys,
I've got a Savin C3535 that the bypass rollers turn in reverse and kick out the paper. Have replaced the feed clutch and one way bearings and the IOB. I have continuity from the IOB to...
I've had to replace the entire exit assembly unit to solve that problem. Replacing individual parts didn't help.
I'm sorry, it is scan to email. max email has been turned off as well as divide and send. it has standard op. panel. only installed a month ago so i don't think the hdd is full. also they are...
When scanning over about 20 pages I get this message on a Ricoh MP C4503. They have a Canon that can do it just fine. They're I.T. people say there is plenty of memory and HDD space. Lastest...
If the drive gear on the left side isn't the problem it's probably the front end fence on the right side.
Have a Ricoh MP C5501 that gets a SC 687 code every 3K or so. Has the lastest firmware as of 4/21/13. reseat all controller and controller to BICU connections with no help. SM and Gooses Guide says...
Customer needs HDD
wher is it I can't find it
Thanks for the help.
Change SP2-914-001 and 002 to 45 to open and close laser shutter for a longer time.
Need to remove the hard drives from a bunch of these copiers going back to lease company. Never saw one before but I am Ricoh trained.
Thanks
what model?
Are you saying it will not copy in B&W that you get a blank page but it will copy in color?