Hi
anyone has idea for sc 666-02 in mp cw2201.
thanks
Type: Posts; User: rhe
Hi
anyone has idea for sc 666-02 in mp cw2201.
thanks
Hi
Try with firmware update -SPDF
Have you updated fimware PCL,FONTS
machine is configured with SAFEQ and universal PCL6 driver is used.same pdf files can be printed on other machine without any delay but mentioned machine is taking time.
Normal PDF file no issue only SCAN pdf taking time about 3 to 4 min for 1 page.
Dears,
Having slow printing issue in MP C3503 with scanned PDF files.
Any suggestion
Hi
i have mpc 3003 which after please wait pop up an an error code sc 670-00.
LED on Controller board,BCU and IPU are blinking,even i replaced all these 3 boards -still same issue.
Any idea
press escape and stop clear key then turn on the printer.
keep pressing both keys till service mode appears, select fuser SC rest and scroll for execute then press ok key
press escape and stop clear key then turn on the printer.
keep pressing both keys till service mode appears, select fuser SC rest and scroll for execute then press OK key.
Hi
All firmware are also at latest level.
Hi
I Have replaced ID sensor,i/o board imaging,paper transport board,BCU,high voltage boards both(PCDU,TRANSFER) but still same error.
it starts first with door open then sc 442 and now machine...
Hi
I Have replaced ID sensor,i/o board imaging,paper transport board,BCU,high voltage boards both(PCDU,TRANSFER) but still same error.
it starts first with door open then sc 442 and now machine...
Hi
I have MP C3503 having sc 370-02.Any idea
Thanks
NO issue with the toner actually dust particles gets enter in the laser optics which should clean carefully or replace it without disturbing the mirrors.
This error is due to laser unit, clean it or replace it
Good Day
i have MP C 3003 having intermittent error sc 670-01.it starts with sc 670 then i update the firmware and it showing sc 670-01.
i have replaced control board,BCU,IPU,IMAGING I/O BOARD...
Greetings
i am havin same issue-Is it fixed with changing transfer ON/OFF drive assembly
Hi
Which NVRAM you change BICU or controller
But if there is problem while writing ,printer\scanner will also stop.
What i think it could be corrupt data in flash memory of controller,Is There any way to clear that data ?
Hi
check the ADF detection sensor
This was happen due to power failure during java update,replace panel and control board -still same
Hi
what could be the reason for SC 672-11.
Dear
java is built in controller board for 02,03 series,only if you want to update it then download the java update file from my-ricoh.com and after extraction copy the sdk file which...
Dear Friend
i update the java firmware for MPC 4503 and now machine showing error SC 636-01.Machine has CAP V2 and enhanced locked print NX installed.i can see on machine panel it is...