Search:

Hi every body
kindly give me part number of control board Document feeder 360 konicaminolta

Hi best wishes for all
Dear i am having one Machine C654 problem in color registration but only appear in cmy and k, mean During printing randomly Appear cmy is printing late and K print earlier on...

hi happy eid days
Yes dear u can install v.3.01 without upgrade kit it will work for all version of fiery ic 306 only u need license key mostly it is available back side of fiery
V.3.01 having 4...

Good morning.
hope every body good and working fine. After long time i came here dear i have i request i am going for shifting a machine Image press Canon C6000 and i have no knowledge about Canon...

Good morning Hope everybody fine I have one machine MGI DP40 its actually Konicaminlta C450 having problem in fusing unit roller pressure motor trying to release pressure and continue moving in...

Good afternoon everybody hope all well
Dear i m facing problem in Bizhub C7000 Magenta color having sometime dots on print mostly its coming in Image area some time on all print 1st of all i check...

Good evening
Dear 1st of all clean registration roller there is a spring adjustment make it tight then check registration lope make some reduction in lope then check entrance of fusing clean...

Good evening brothers hope you are all fine. i have one Bizhub C70hc it has a strange problem when ever you print double side and select any choice for binding position machine will print only TOP...

Good afternoon hope you are all fine. I have one machine bizhub C8000 its showing C-2721. 1st time i saw this code machine is around 500km away just i want to know if some body encounter with this...

Hi hope up to now you solve this matter don't take it serious its feeling like fixing unit is out of machine put it back then reset trouble hahaha its funny han.
Dear simple matter your heating...

Hi hope you enjoy this problem reset is best hope fully this problem will gone but take care after resetting don't start machine on same configuration some change the IP address update firmware at...

Hi hope you salve the matter i m little bit late to see your problem in my view to up load the firmware USB is most famous & parity easy just make folder of name C7000 and connect and start uploading...

hi hope you succeed in salutation of this problem. if not try to replace any other NVrom its only possible from this take out NVrom and try it any other machine try to rewrite firmware in other...

Good evening to all hope you are fine
Brothers i need one information its related with Firmware Bizhub C8000 and develop C8000 are using same Firmware or different. Can we use Bizhub C8000...

Hope you find the salutation but if you are still fighting do not stop it and keep try different ideas. what i fond from your detailed msg. it is from Fiery if you have any spare fiery confirm it by...

Good evening all after long time contacting you. I have one machine LD6500 konicaminolta it shows error C-C101 in detail this code came when an icp is open from printer controller board. i check and...

Hi every body Dear i need one mother board of IC 306 (S 5217)main board. Kindly help me where to by if some body have used ic306 or main board kindly contact me saghir377@yahoo.com

Good evening all friends I have one 7000 there is a issue of color registration during color registration it shows C-4522

Dear its locking from separators but there is a chance from web unit timing if you increase timing of web supply it becomes better. also you can decrease the paper wait it will effect the heat. if...

Dear you didn't mention complete details any how in 1050 paper jam at registration normally low wait if it is low wait paper try to adjust loop from programming
if it is in thick paper then check...

hi Dear hope you all fine i have 1 machine having problem message on display Receiver exchange this machine having sd501 i reset all paarts of sd501 but its still showing any body have solution....

Dear any body know how to reprogram IC408

Hi Dear switch off image stability auto gamma and color registration after that machine will be ready for print print around 100 print of different image with full color after that switch on every...

Slam & good evening to every body. Thanks to all we always help each other. My problem for today i have one machine OCE 665 If any body have its fiery solutions kindly give me I need driver & working...

Good afternoon to every body i need one information that in C8000 lower fusing belt unit only belt is available or not. Or some body try to replace only belt.
Thanks & regards to all for supporting.