Search:

any body have the part number for the original rollers ? we removed an internal finisher

thanks
no other work was done to the machine in past 6 months, just a transfer belt then.
nothing else on the circuit in the customer building, so i am told they checked.
the circuit breaker trips...

think dc power supply is bad, what made it go bad?

customer said it was tripping their breaker in the panel box.
when i got there, the fu102 was blown.
replaced fuse.
i disconnected the dc...

cleaning
i did clean the rubber rollers in the feed path from the tray up to the registration.
also replace the tray rollers as they were bald.

it of course is not a contract machine so any...

yes that helps alot.
i need 2 of number 9.
the parts list you have attached is for the fixing section

any one have the parts manual?
i need the 2 white idler rollers to the right of the registration roller.
they have flat spots worn in them.
if you pull out the transport/fuser section.
you can...

hello
looking for working used lct rt 4010
for ricoh mp 6002
shipped to me $350
auburntechnology@gmail.com
paul

no errors for developer failure or itb

hello
we have an mxc402sc doing the same thing
depleted all deveolper thanksgiving in cyan development unit only
no codes
now they call back stating light cyan again
unit is not depleted...

revived thread
you have part numbers for these parts?

engine was 1.56
now 1.60.08
system was 1.23 now 2.00
network was 8.27 now 8.31b
web 1.10 1.12
fax 4 5
scanner 1.23 1.24
printer 1.22 1.24.3

yes
the little tray is installed
just wondering if there is firmware for the finisher

Message:
have stacker folder
sr 3020
before firmware on copier update runs 1 folded set
then says remove papers from tray
remove papers message stays
update firmware
runs 4 sets then...

you still have the mirror motor
i need one
i am in southfield mi
paul

had df size senosr bad was only copying a3 paper
also in paper settings u can tell the machine the paper size in drawer and turn off auto paper size detec

what is mpc 5000 controller?
will it be updated to scan to windows 8 and server 2012?
sorry for the thread hijack

independent tech near detroit michigan
i do have a ricoh tech id from when i worked at gestetner
looking to be "hired" by someone near by to be a tech so i can have access to tsc since i have been...

i am more than willing to pay for access
it is what $125 per tech
i do have my own corporate email but i am not a ricoh dealer just sharp

new install
been there a week
error u2-23 could not enter sp mode with fax option hooked up
removed fax option
run sim 16 reset code
reinstall fax option
i am new to sharps
do i need to update...

need a freind or company
need mp c5000 firmware
possibly mp 2550 also
ricoh kicked me
i do have a tech id
but was laid off 7 years ago so i started my own repair company
i am in metro detroit...