what logo shows up when you reboot the MFP? is it the rocket ship/outer space logo... or the KM logo. If its the outer space logo.. its also possible the NVRAM has blown, there is a recovery...
Type: Posts; User: bigmark
what logo shows up when you reboot the MFP? is it the rocket ship/outer space logo... or the KM logo. If its the outer space logo.. its also possible the NVRAM has blown, there is a recovery...
just out of curiosity, you said you unplugged the drum unit? it just slides out, there is nothing really to unplug. I agree that if you shook this developer unit/drum unit carriage, you probably...
I have had some luck just soldering a new Cat 5 connector to the board on other models with this same issue. They are a standard connection of pins that connect to the board. Takes longer but on...
yes you can reset it, there is a pico fuse just like the transfer belts and fusers on other models.
I would set the account verification or account track up, and set the people up to only print b/w as well. Is a very affective and easy way to do it.
usually cleaning with alcohol both grid and wire works well. I have seen others use a pencil eraser on the wires - carefully - and it actually does a good job.
if it says memory full, you can try checking the user boxes and making sure that there are not alot of files in the user boxes. You can also try to format the HDD but it honestly sounds like...
try calibration on different media types. some times calibrating on different media types will help. then apply it to all media types. Are we talking Creo or Fiery here?
the other option you have is if you can still find a copy of the alchemy package some place. Alchemy will allow you to print bar coded pages in between the pages of the seperate jobs and then file...
the other option you have is if you can still find a copy of the alchemy package some place. Alchemy will allow you to print bar coded pages in between the pages of the seperate jobs and then file...
well, good news bad news. Try to print from the tech rep mode the reg test pattern. if this is still coming out orange you are going to need new transfer belt. I have had this problem several...
if you are trying to find it on the konica web site, click on color MFP> Select any machine model.... C252 C650 etc > then select utilities> select show all
You will see cygwin, and firmware...
Make sure you are setting the copier to the proper thick paper mode. You can also set the machine to quality, instead of speed for fuser settings in the tech mode. It sounds like you have toner not...
there are also a couple of other little fixes that might be at fault here. there is a new style holder for the drawer, the old white ones tend to bend out and not hold the drawer shut. usually you...
if you vacuumed out the developer unit you may have toasted the ATDC sensor in the developer unit. on this model its very sensative. if you want to check, if you have another 350 you can swap drum...
make sure you have the newer modified fuser drive assembly. the lower one way now has more support and the upper one way has a slightly different shaft. I have found that if the one ways go bad... ...
I am sure you did this, but make sure its calibrated as well... should calibrate depending on how picky you are about color any where from once a day, to once a week. Also, from time to time you...
is the IP addy the same as the previous copier? if so, there is a good chance that somebody is still trying to print to the old Toshiba printer and using that driver. then the copier is seeing...
one other thing to check really quick, make sure the lever on the left side of Fuser is in proper position for you paper type. it may help with the lines that you are seeing. especially if the...
Its always a good idea to replace the drum and developer at same time on this model for PM purposes. and dont forget the filter... at least vacumm the filter off if you dont replace it.
well, if you call Konica they have a parts ordering line... they can help you find a part number there.
even if you do find a lamp that will fit, good luck getting the fuser apart, and then getting it back together again with out breaking anything. have seen many people try, and nobody has ever...
i believe you have to contact Fiery directly. usually the BIOS is on the motherboard. but you have to order the motherboard directly from Fiery. They install the special BIOS themselves. if you...
you could use netcare to find the machine on the network, then assign it an IP address from within netcare then do the rest of the setup throught he emperon controllers web interface. I do this alot...
define fritz? bad copy quality? etc... if its actually doing something bad.... no sense in resetting it. just replace it.