When I started with this company we were the largest independently owned dealership in Texas, and even then we had over a hundred employees in several locations around the state. Now we are a...
Type: Posts; User: Hallmark
When I started with this company we were the largest independently owned dealership in Texas, and even then we had over a hundred employees in several locations around the state. Now we are a...
I cannot provide you with the OS which you need to reload, but I can tell you the most common thing that causes it to crash is not shutting the controller down before turning the copier off. To shut...
Amusing, but raises some questions, like how does this get around the fact that cellphone connections operate on 850/900/1800/ and 1900 MHz frequencies, and WiFi operates on the 2.4 and 5 GHz...
C7 could be nothing serious but it had to of happened three times before it quit resetting itself, which means it has happened to you before. This model has a tendency to throw this code for no real...
Mike, the manuals are available but they are named for the DP5570 DP6570, and DP8070. They are for the estudio 55, 65 and 80. I just PM'd you about it.
From the main page click on toshiba. All the manuals begin with ES for estudio. The documentation you are looking for is the ES 160 120 125 (same documentation for each model). They are not in...
www.checkeranderson.com
I am not trained on this controller, but I do know that the default admin password is 12345. This part I am not sure of, but when you start the copier while holding down the START and 9 you will go...
I would ask did you replace the transfer belt only, or the transfer belt assembly? If you only replaced the transfer belt (or perhaps the assembly as well) then you might want to check the drive...
I prefer Firefox, but I use IE7 for those sites with certain Active X content. It seems to be okay, but I don't really use it enough to give a good critique. The only negative is just a matter of...
We have a 4 hour response time as well on most calls. If it is a PM call the response time is 72 hours and certain other situations will bump up the response time. However, each customer is...
Your modem is not what would prevent you from sharing your internet access. The router is where the configuration needs to be set up.
Without a router this is basically what happens. During the...
Working for Toshiba, we are expected to average 4.5 call per day each month. The benchmarks we have do have a weighted value when considered for pay increases, but they are not shoved down our...
How\'d this shit get in here? I thought the forum was moderated.
Not working on the 3rd or 4th. You might has well take off as well if you have a choice ... won\'t be much happening.
I just gotta throw in my two cents. There is a big difference between killing innocent people with car bombs, beheadings, torture, and air planes then supplying someone stupid enough to shoot heroin...
Problem was solved. I called Toshiba\'s tech support and found out that on the new machines the message \"use genuine toshiba toner\" has been replaced with \"toner not recognized\". Armed with...
I will go to this call in the morning since I was only told about it on my way home for the day (hate it when that happens). A new install just delievered. When our sales person was showing it to...
I agree with doing a complete call when you are in front of a customer\'s machine, regardless of the PM count. In many cases, it is only the PM alert that prompts the customer to call for service to...
http://www.homestarrunner.com/sbemail.html
ftp://support.lanier.com/Incoming/Service_eResource/SMenu.htm
http://www.nba.com/spurs/
I\'m in Converse, Texas, just outside of San Antonio and as of today the best I have found for regular is 2.60 at a Mom and Pop place just down the street. Average seems to be about 2.65 everywhere...
Your Ricoh 1027 is the equivalent of the Lanier 5627. Attatched is a tech bulletin describing your problem and the possible solutions. Let us know if it helps you....
I am new to this board and this is my first reply to any post. I am glad you resolved your issue with the clutches. I just want to add that Lanier published a bulletin a long time ago about your...