Thank you will give that a try and see what happens once again thanks for the help.
Type: Posts; User: kirwayne
Thank you will give that a try and see what happens once again thanks for the help.
Question I have a machine that kick a 540-8001 error and this a new machine, also before replacing this machine the old machine was kicking a 542 error code . I know these codes are finisher related...
I found out that there was a problem with the network, after flashing the Image Pass IT was able to access the machine and the Image Pass from there desktop. So they are working on solving that...
I am goint to let the IT guys know what I came up with thank you guys.
The reason I asked is at one point the customer was able to print to that machine with no problem with the same setup. Was trying to see what may have changed to upset the flow
I have 2 5185s that the customers are having problems printing to one has an external Ecopy the other don't have Ecopy. They both have H1 Image Passes mounted to the machine, I flash both the image...
Anyone happen to have the part number for the Open Interface PCB for the 5185?
Thank you
Will give that a try cause I switched out every board and checked the memory same issue, however didn't try the Open Interface PCB.
Thanks much
IRC 5185 with an E748-4000 and E 748- 4894 changed out Main Controller cleaned the copper tips on the various other boards but still having the same issue. Can anyone point me in the right direction...
Thank you very once again you guys have got me out of a sticky situation
thank you:)
IRC 5185 Error Code E202-0101 help please if you can
Thank you
I will let my supplier know thank you for you help you guys are the best.:D
I am trying to find the correct number for a Main Controller for an IRC 5185 I tried FM2-6807-000 and the FM2-6807-010 and my supplier is telling me that its not the right number. They informed me...
I tried it and thus far everything is working fine thanks for your help I hope that realy solves the problem its been a few days and the code have not come back so will keep fingers crossed.
...
Thank you will give that a try
Just wanted to know if you guys can help IRC 5185 with E584, machine first had E531 code changed out the finisher and now getting E584. I can run copies use hole punch and everything is fine as soon...
Thank you will take a look and see if that works
Machine with jam code 1001 machin jams when customer uses machine when I remove paper jam and run about 1000 copies machine works fine. Two days after the customer has the same issue with the paper...
Thank you very much
I am trying to find a Servive Manual and or a TRG for a Canon IRC 5185 can anyone point me in the right direction.
Thank you
Thank you guys once again with your help I was able to solve that error code issue I changed a roller on one machine and the others I changed the Fixing rotation to 3.1
Thank you :)
Thank you very much I will give that a Try I think that tip should help, cant wait till the 6800 are replaced with the 5185 lol
Thank you
Sorry its an IRC 6800 and if I turn the green handle the rollers move, I removed the gray cover and cheat the door. I can see the rollers moving during the warm up process the motor moves, when it...
I ran into an error code of E014 I checked the fixing motor and cleared the error code and still same issue. I have about 4 machine with the same problem, can anyone help me with this issue.
...
Just wanted to say thanks or helping me with the jam code, what happened was when the piece of paper was removed the flag for PS9 came out and was blocking the sensor. So I:D had to snap the flag...