Search:

It will work but you need to see what the error is before you can proceed.

If you wait long enough the machine should pop up with an error message that you could use to diagnose the issue. It...

Thanks.

I have the manual. However there is no wiring diagram, just a component layout. I can tell that the IPB board supplies voltage and signals to the op panel. Is there a test point on the IPB I can...

Okay so the only way to check it is to remove parts with power on until the op panel comes on? I've done this with Ricoh machines, wasn't sure if I could do it with Canon's.

Drum, developer,...

Board gets power, it lights up but the panel is blank. Also, it can't be pinged or printed to, not sure if that is related.

Replaced IPB board and the DIMM.

Still blank panel.

About to...

No the power button doesn't work. The only way to get the machine to work is to switch it off and on.

Hi all.

I have a Canon that, when left overnight, has a blank screen in the morning. The op panel is lit, so it's getting power but none of the buttons or the touch panel works. The only way to...

OMG this has really been pissing me off lately!

In the past two weeks I have gotten 3 busted up, used, and broken parts for down machines!

This week it was that long and thin fusing exit...

Turn off Divide and Send and Max Email Size as already mentioned.

Also, I've seen some machines that won't scan more than 10 11x17 full color images at 600dpi in a single pdf.

It is a...

Behind the machine there are two IO boards at the bottom. IOB has a connector on the back that doesn't go all the way in if you just press it in and bolt it in. You have to remove both IOB boards...

Depending on the OS it could be the permissions are set incorrectly. Make sure the user that the machine logs in with has full permissions under the sharing and the security tabs on the target...

Replace the DIMM memory module.

There are several versions on the config page.

Sys Software 040.033.53170
Net Controller 040.033.53170
UI Software 040.033.53170
IOT Software 008.032.000
CCM Software 040.033.53170
DADH...

I've had these machines down here in Florida for years and I've fixed them all when they come from the factory all screwed up.

The problems are many.

The first issue is the way the developer...

Hi all. I'm looking at a Xerox WorkCenter 7655 and the black image is shifted from the other three color images by about 4mm. I don't have a service manual or AWS because I don't normally work on...

I'm having a similar issue. Can anybody tell me how to do this?

What version server are they using? I had an issue with MS 2008 R2 Server for some users would print in color even though they specified black and white in the preferences in the print driver. The...

Yup, charge power pack board is the most likely culprit here.

You have to replace the motherboard. It's the board that the controller and MFP options plug into. Good luck!

You could also download an app called ScanRouter Lite v2 for free to use on this model. You just have to enable the delivery server option in the User Tools > System Settings