, As mentioned above,
also follow link for more details,
Sign in with App Passwords - Gmail Help
cheers,
Type: Posts; User: SAZ911
, As mentioned above,
also follow link for more details,
Sign in with App Passwords - Gmail Help
cheers,
Hi,
As mentioned above by Zoraldinho, you can generate a "Mail App Password" for each device,
see below link for deets,
Sign in with App Passwords - Gmail Help
Look under "Create & Use...
Hi All,
I have an issue with a 7280i that I hope someone can assist with,
the device is missing a small gear drive Assy, that drives the "Roller Assy, Paper Feed, Left" (FM3-9916-000),
under...
Hi,
38264
If the device does print before the error comes back up, the manual suggests something other than Main Controller.
In my experience i have found that if everything else suggested...
Hi Tim,
I have just had this issue with duplex printing and just resolved it this morning, I can tell you it will probably be the fixing assy, mine looked perfect but wasn't in the end....
Also...
Hi Canuck,
Spot on, thanks...... (Slow Duplex Printing solved by replacing Fixing Assy)
I did check the fixing assembly for temp loss but it seemed to be fine, Even compared to another device....
Hi,
Are you using a New genuine Canon issue HDD, they are partitioned in a specific way and formatted specifically for their software, you cant use a normal HDD, the firmware will not install as...
Hi All,
Just to update you guys, I tried formatting and redoing firmware from new,
Unfortunately it didn't make a difference for copies nor printing, still runs slow.
I have order a Main...
Hi,
Will try a once over again this afternoon / tomorrow morning and ill let you know what happens....as soon as i know more,
thanks for the help, much appreciated....
Hi Zoraldinho,
Checked Settings ? Registration for a settings that may be slowing it down, but i have found nothing as i did a MMI clear which reset everything to default.
Also checked the...
Hi Zoranldinho,
Thanks, that is a good idea, i will check and get back to you with what i find.........
Hi,
Thanks for the suggestion, though the device is on my network at my office (No POE) and it also prints slow when used as a standalone copier with no LAN connected...
Thanks anyway,
* i...
37878
Hi All,
I have a Canon IRA C5235i that has an issue when printing, its seems to take a long time spooling, though when you check the status on the pc, it has spooled completely and printed...
Hi Teckat,
Thanks bud, you hit the nail on the head........the Bias tab was stuck in.
Thanks bud.....
Hi,
Maybe its worth trying to order online,
We usually pay about $550 - $600 for a PF-04 and about $200 - $250 for Purge unit.
Also i have noticed that if a plotter is run regularly,...
hahaha,
sorry i have copier tech eyes, i only see photocopiers,,....sorry...
Hi Guys,
Need some ideas.....
I have a Canon IRAC5235i that has a lot of gaining on the page, much like what it looks like when your developer is shot....(white dots everywhere)
I have...
Hi,
Yes i have found the same thing, if you used the same printer it should be fine if you print on different devices you will get fusing issues, as the toner may have slightly different heating...
Hi,
Have you checked the contacts between the black drum unit and the image process assy, earthing tabs...
Looks to me like your black drum is not discharging before the next copy or the pre...
Hi,
Not 100% sure, but they have re-issued licenses for send kits, even DE-registered licenses for me so i could use them on a different devices. You will have to request this through your local...
Hi,
Not sure on the environment of your machine, but i have found that if it is not air conditioned and you have a lot of dust, the purge unit clogs up pretty quick as the dust makes the ink in...
Hi ,
Check your Ribbon connector from the CIS to the Reader controller.....if you haven't already, had a similar issues, except the feint bands were much narrower..
Good luck.....
Hi Teckat,
Thanks for the reply,
Yes the Grid test pattern is offset in both directions...
we are busy stripping this machine right down today and will rebuild, will also try do things step...
Hi All,
Hope everyone is having a great Monday...!
I have the same issue as above, and i have noticed there are few other posts covering the same issue,
We have gone through all the same...