Search:

I managed to get to the service password entering section...the only problem is getting the password...:mad:

I managed to find the firmware, i just need to figure out how to install it. I tried looking for the service manual to enter the service mode, but it's currently not happening. I thought it would be...

Do you guys have a service manual for a c454e machine by any chance?

lol. She's not a tiny girl imagining clicks :P

now if you can direct me to where our secret stash of firmware is that would be awesome! lol

I am on the hunt for the firmware now. Thanks!!

First, thank you for replying!
The machine is not hooked up to the internet, it is on a router, but the router does not have access to the web. Is there any way to update the firmware with a USB...

I recently upgraded from a bizhub c253 to this machine. I have been having jamming problems it shows that number 5 and number 11 is where the jam is normally. I am feeding it coverstock paper that is...

Hi Everyone!
So, I have a new Konica machine which started jamming today. It is having problems pulling the paper from the bypass tray. It was printing on the same paper and settings earlier without...

Thanks everyone for your input!! :) It was a relief to learn that this was normal. I normally buy used machines and decided to buy a new one this time (to try and last longer!) for the upgrade.

Hi Everyone! I just got a new KM c454e Machine and the meter had 196 Prints on it. does this sound right? I would think that a new machine would have zero-ed out counts....

Also, any thoughts...

So, I spent almost 3 days removing everything. I didn't manage to remove the hoppers because the transfer belt guard refused to come out! I decided to put everything back together to see if it would...

Thanks for the heads up!!! So far, no fire. I should probably stop vacuuming then...I started removing the guard, but is having a problem getting it out.

I used OEM toners, so maybe heat? A few others were claiming on Humidity, which would make sense because the moisture would probably make cookie dough out of the toner ={

This may be my case. We've been experiencing a heat wave and with construction on my storefront (landlord\'s idea) It's an oven here...I don't have central a/c, i've been trying my best to keep...

Working well so far :) . . .I do have a question should I turn clockwise or counter clockwise? I am also using a vacuum with a homemade nozzle to assist (if that's a good idea...). So far I managed...

My thought (about giving up) exactly this morning. I am so deep in already, might as well. :) I had one person tell me to re-assemble it and change the yellow IU....i doubt i'm doing that. =D

For my case, it's probably worth it. I am servicing my own machine and I can't afford a different machine right now.

Is it something that is doable? I had a reply on a different thread saying that it's not doable...i'm facing this same problem right now :|

Different toner didn't help. I stripped down the copier to try and get to the hoppers so I can de-clog it....stuck at how to get the hoppers out. I managed to remove the back layers...Help!

From your experience, why is it making the noises? To add, it seems to be making a loud gear hitting sound

My problem started a few days ago when I replaced the yellow toner on my Bizhub c253. After about 20 or so pages, it would make this really loud noise in the lower right side of the back door where...

Yep that solved it :) Though I had a hard time finding the side you mentioned to take it out. It's printing, but after a few pages, it would start to make the noise again. I am trying a different...

How did you fix it? I am having the same problem right now. I had replaced a yellow toner and it took forever to warm up and then when it finally warmed up, it would make this loud noise in the back...

ok, I will try it! :) Thanks!

Not to make an old thread come to life again, but I have no idea where the new thread link is...anyway, I am having the same problem
I tried everything I can.