Sorry for the typo on the 730. we are looking for only 1 at this time.
Type: Posts; User: Sayens
Sorry for the typo on the 730. we are looking for only 1 at this time.
yes the 730
If anyone has one for sale, drop a note to: skrahling@opgup.com
Do they have the driver set to black/white?, if it is set for color it will lock up.
Kyocera has a HyPAS app called SharePoint connector. The dealer should know this.
Remove windows security patch KB4408960, and/or KB4480970.
Check the toner opening, had a few that it left a film over it, and also open and close the rear fuser door.
Have one in stock left, if you need it.
Call Cathe (906) 482-0612 or casayen@opgup.com
Replace the registration sensor with the cover open sensor.
Shot in the dark but anyone have aLCD panel for one of these laying around? Pretty new unit so used parts not veery easy to get. Same as the KIP 7170 and maybe the 770. machine 14 months old and no...
It is in the new firmware, to correct this
At setup you should have done U425 and then run U411, there is a color chart that has the numbers on it to be entered in 425 then scan it in 411.(2 Actually) Had numerous machines that running these...
The only way to reset, is when the printer needs the PM kit, then under service setting you can reset, if you put one early it can't be reset.
24351We replaced all the drive, and all the guides and rollers in the machine feed section and still had the nicking and jamming.
what we did as a test was to install a mylar over the sep assy and...
Try 0614 1010 it should work
run sim 21
Jump pins 2 on the print sys, power up the copier, reset the pin back, it will reset the print sys to default