[QUOTE=PressingPrintz;2587697]Okay guys. Here’s another clue to this problem. It is significantly worse when printing a 600x600 test print compared to a 1200x1200. Any thoughts?
f you've done a...
Type: Posts; User: semi
[QUOTE=PressingPrintz;2587697]Okay guys. Here’s another clue to this problem. It is significantly worse when printing a 600x600 test print compared to a 1200x1200. Any thoughts?
f you've done a...
I've had this before when one of the PCU's waste coil spring had snapped - woth checking if the WTB has recently been changed-check all the PCU's
Scan counter only available with MF4 Series
It's some Xerox crossover box
Card reader has to be set to active in Screen service mode
You can order the charge roller assembly complete - and the other bits,blade etc -in the IMC 300 Parts manual
Genuine Ricoh D2589510 OPC Drum IM C6500 C6503 C8003 C5200S C5210S | eBay
Just in case anybody wants one-cheap!!!!!
I like the no obvious damage:cool:
And it's the same in the UK , cheaper for whole fuser-just takes up more space in the car!!!
Change STR- SP5191-001 Update device to latest package
Think it might be this
Customer was using E-44 PLC6 Driver instead of PS driver-thanks all:cool:
Hi customer has set up device with E44b Fiery-there getting "Invalid media type was specified Press reset to cancel the job" when trying to print. Have advised to check device tray settings match the...
No-totally different
+1 You need to contact the @remote team at Ricoh UK to get the device removed from the sever as above,takes about 20 mins try emailing ricoh eservice
New Ricoh MF4 -Metis uses SSD as standard
Change the one way bearing on the sep roller drive shaft
Whole toner housing assembly
Push it back into place with a long screwdriver
57256Having issues using this dual card reader Hamster Pro Duo/CL - Fingerprint Scanner with Card Reader when customer swipes card the reader does not wake up the screen,only way to get it to work...
The colour prints are fine so there's no issue with the transfer unit or the HV board-the black bais terminal(spring) is not contacting the metal plate for black on the transfer belt unit.
Remove...
Turn Off Auto continue and turn on Auto tray switching in Printer Features. machine now stops to display load staples.:):)
On a IMC Series you can
Fixed-stretched transfer roller bais terminal spring
Running out of ideas's on this , SC491-01 ,New Black PCU, Transfer roller, transfer belt assembly, High voltage Power pack board.
Any other idea's apart from the skip....... / Dumpster ???
You CANNOT fit a black D2392245 PCU for a 04/03 colour PCU ,the gearing is different and will take out the drive unit .