SC 672 for MP C6503 does exist, it refers to Controller start up error. I have seen this on MP C5560, MP C8002 and Pro C5100. Cause of the problem can be a bad connection of controller board, HDD...
Type: Posts; User: bat
SC 672 for MP C6503 does exist, it refers to Controller start up error. I have seen this on MP C5560, MP C8002 and Pro C5100. Cause of the problem can be a bad connection of controller board, HDD...
problem
I need more info about your problem...
Did he changed the drum?
Potential sensor is not mounted on PCDU, it is above PCDU.
This could be a problem with Yellow Potential Sensor. I have seen it on some production printers. No SC Code, just uniform yellow background fill.
The Ricoh Pro C7100 is a production printer, call a trained technitian.
This is a development unit issue, run full dot pattern to identify unit.
There is something in the laser beam path, between shield glass and laser unit mirrors. Once I found a screw in the laser unit opening resulting in the same manifestation.
Check the lamps. On previous generation machines i had a few blown lamps.
This is a Prinect powered system, not a Fiery print server. I dont have much experience with Prinect but I think that is a licensed system by Heidelberg. So in order to use it you have to have a paid...
If your machine is working fine, and doesn't have a problem don't mess around with firmware if you don't know what you are doing.
Select Batch in the Scanner Original Feed Type setting..
59447
Thread update, downgrading firmware didn't work. All PCDU are tested on other machine and working fine. So problem is narrowed to boards, most likely controller...
The definition is referring to PCU.
SC682-12 PCU: ID Chip Communication Error(C_Device Error (No ID chip))
I have replaced toner cartrige and PCDU. This was a working machine, the error accured...
After SC682-12 i instaled the whole package, latest firmware., still no luck.
Sent from my iPhone using Tapatalk
The technician tried to install Engine, Network Support, Web Support firmware, System/Copy firmware was not installed. probably should have installed System i Engine as a set. So now the machine is...
Remove Toner Bank Unit and check pin on metal plate that actuates switch.
55803
Hello all...
I set up a new Pro c5100 with E-42b, soon after copying Paper Catalog from a another working machine with SD card, paper catalog entries are missing names or only part of the name of...
Prinect DFE is different from Fiery server, a wile a go I tried to connect Prinect to pro C7100 and with all my efforts, I did not succeed, what I found out and most importantly, the Prinect server...
Raplace HDD.
Paper Transport Motor 2 Error
Motor driver IC error has been detected. Always monitored except when
a cover is open.
1. Connector disconnected
2. Harness broken or shorted
3. Motor defective...
Izvini, greška :rolleyes:
50562
Hi all...
Yesterday I went to costumer to install Prinect DFE to Pro C7100X (Linoprint), after connecting and power up machine and print server, error code appeared, and server cannot connect to...
Contact me..
The problem is Corona Assembly.