Thanks
Thanks for the reply Iowatech. I did my best to check all the fuses and connections when the issue initially happened, everything seemed fine but maybe worth a double check.
Type: Posts; User: youwithrhinestones
Thanks
Thanks for the reply Iowatech. I did my best to check all the fuses and connections when the issue initially happened, everything seemed fine but maybe worth a double check.
Hello,
I'm having an issue with my RISO RP 3700. But now when I power ON the machine it does absolutely nothing. No sounds, no panel messages, just nothing. The issue started when I moved my...
I've read that as well. I heard bending it slightly can fix the issue but I'm unsure how to bend it. Were you able to fix your issue with this?
Thanks for the reply!
Hello,
I am having an issue with one of my RP 3700 drums. It is only my blue drum as my other drums work fine. But when I use this blue drum it doesn't want to eject the master. I always get an...
Hey everyone,
I'm looking for some advice on paper stocks that best absorb the soyoil based RISO ink. I'm mostly working with cardstocks but am looking to hear what people have had success with....
Hey Jac,
Thanks for you response. Here is my network setup, I have an older DELL laptop running Windows XP networked to the printer (why am I using an old windows? because the RISO Print Utility...
Hello, I have a RISO RP 3700 and I think my RISORINC Network Interface Card might going bad. Here is what happens, when I start up my computer and then I turn on my RISO machine and the printer pops...
Thanks for the replies! I will definitely look into these.
Hello, I have a RISO RP 3700 and I think my RISORINC Network Interface Card might going bad. Here is what happens, when I start up my computer and then I turn on my RISO machine and the printer pops...
47k on the cylinder it says.
Thanks for the reply. I'm not actually sure on how to check the copy count on a drum? Is there a way to clean the 8.5x11 impression?
Thanks again!
RISO RP 3700 and for the original I'm just leaving the scan cover open and covering the leading edge slightly, basically trying to get as heavy of an ink coverage as possible. When I look at the drum...
I had no luck trying to get my mac to network to my RP 3700. What I did was found an old windows laptop (usually really cheap or free on Craigslist if you look hard enough), installed the network...
Hello,
I'm in the middle of converting the color of a 11x17 drum I recently got and I noticed it has a dark border around where the 8.5x11 prints would run, see picture attached. Has anyone seen...
Found it! It was on http://download.riso.com/ under the embedded controllers drivers. When it asked for the model I was only looking under RP 3700 but once I further researched the options there was...
I'm trying to find a copy of the utility software that came with a RISO RP 3700 or any software for the RP line would probably work. Anyone know where this might be available either download or for...
Looks like the only way to assign my RP3700 an IP address is with the RISO Utility Software CD...which I don't have. Does anyone know where one might acquire the software either via download or...
Very cool. Which school in particular. I actually graduated from UNC Asheville a while back.
Thanks HenryT2. I know there is spec sheet you can print when using a RIP, I'm still trying to find out how to do one if I'm printing through a network from my computer. I'm gonna try and run the...
Hello,
My name is Troy and I work as a graphic designer in Asheville, NC. I recently purchased a RISO RP 3700 to do some art prints and small-run publications. I also hope to collaborate with...
Hello,
I am trying to network my RP 3700 to my PC running Windows XP. I've download the drivers from RISO's website and I am trying to install the printer via the instructions on:...
Thanks RRogers!
Hello,
I recently purchased an RP 3700 and was just trying to get an idea of how many masters I should expect to get out of a brand new master roll?
Thanks in advance.
Troy