I was able to get the part from CSI. I installed it and now the machine works fine.
The challenging thing about this was that the cause of the malfunction was not immediately obvious. It was only...
Type: Posts; User: Thymeclock
I was able to get the part from CSI. I installed it and now the machine works fine.
The challenging thing about this was that the cause of the malfunction was not immediately obvious. It was only...
The problem is a rear broken upper fuser gear. Part # FS5-0379-000, 45 teeth.
Apparently it is obsolete. Does anyone know where I might find one?
No paper found. It never chewed up any paper, unit 1 just stopped working. It's been so long since I've had to access jam codes that I've forgotten how. Please tell me how to do that to refresh my...
The screen says "Pull out unit 1 and remove the jammed paper." The paper has the copy visible. It is lying flat but it hasn't entered the fuser. What's the cause and the remedy?
In my case I still have an occasional report that the door is not closed, but now I know with the problem is. It's a mechanical problem involving the closing of the door: if the tab on the door that...
I'm happy and proud to say that I solved the problem. :)
My first thought was that if the LCD report about the right side #2 door section was accurate it should be in that area and nowhere else....
I finally got around to reviewing the information and I appreciate it. I've been a service technician for other mechanical equipment for 35 years, but not for copiers - so I'm not familiar with the...
Okay. Now please explain what those mean. How do I fix it?
Here's the display for page 5:
B_JAMO: 010A 010E 010E
B_JAM3: 010E 010E 010E
B_JAM6: 010E 0108 010E
B_ALRM: 0000
B_ER1: E712 0000
B_ER2: E713 0000
B_ER3: E713 0000
A: O
I read the pdf, but it only says what I already know - that the indicated problem is supposedly in the right door area.
Did the pinhole / service mode routine. The numerals it lists in the left...
I remember having to get into service mode several years ago when I had a similar problem with it. But I've forgotten how to do that, so please advise me on how it's done.
It's not a numerical code. The LCD display indicates that there is a jam located in the center door area on the right side of the machine. That's where I found the piece of torn paper. But now there...
When making multiple copies my Canon NP 6050 reported a paper jam at the right side center door area. I retrieved a 4" square of torn paper from that area but could not find any other jammed paper...