Dear Colleagues,
Good day, following the easy advise first works. Please see attached result after doing the following:
1. User tools, maintenance button, auto color calibration
2. If you have...
Type: Posts; User: martinco02
Dear Colleagues,
Good day, following the easy advise first works. Please see attached result after doing the following:
1. User tools, maintenance button, auto color calibration
2. If you have...
Dear Colleagues,
Kindly need your comments what is happening on out Ricoh MP C5503. We tried already replacing the PCUs Assy - CMYK and ITB belt and unit. But still the same, printing with shadows...
Dear Colleagues,
Problem is now fixed, without any parts replacement. There is a small foreign object plastic underneath the PTR unit. After cleaning up everything in this location. Print out...
Good day Everyone,
Seeking your advise regarding what we encounter with one of our Pro C5100 machine. Suddenly it print outs with white markings like dust or dirt from a roller.
Already cleaned,...
Hello Ben,
May we have a copy of service manual for C5100s. Thanks a lot!
Regards,
Martin
Hello there Amigos,
Any manual for MPC305SPF? TIA!
Regards,
Martin
May we have a copy of the service manual.. please Thank you Kabayan! :-)
Hello rsyarcia,
Where did you found the toner transport section?
In my case even the Toner-Black was outside the machine the error messages still shows that the toner has been depleted, tried...
Hello there,
tried to check the contacts from brb, gear from pcu.. and everything is ok but still toner has been depleted is the message. Will check the toner transport belt. Thanks again.
Hello Zeldaman,
brb-pwd can be found at the back of the machine? right? so we will just check the pins where the cables are connected. And btw what is the pcdu?
thanks a lot for your quick inputs.
Hello Guys,
Good day, we would like ask some advice regarding our new MP-C305 SPF. At first it show No Toner icon below (Black was empty) and we tried to replaced it with brandnew OEM Ricoh toner...
Thank you guys, found it on service/operating manual. Will check also the logging data report.
Hello Everybody,
Anyone here got a paper jam code list for Ricoh Copier Machine, especially for Aficio MP1107ex? We would like to know each description of the codes. Thank you in advance! Your help...
Hello totoro,
Hello slimslob,
Thanks for a quick advise and suggestions.
@totoro, for your question, yes we already did a swapped and it doesn't help. About the paper size it was only for tray 1...
Good day everyone, we would like to ask your advise/suggestion as we currently facing trouble with tray1 (paper feed unit 1 area) of Ricoh Aficio Pro MP1107ex. Paper always stop on this unit and show...
Hello Thinman,
Your third advice works, "Third remove the metal cover and check the play of the solenoid. The pin where it fits into the paper guide will get at an angle not allowing free play....
Hello Guys,
Could you be so nice to give some of your experience with paper misfeed J073. We already clean the 2 duplex sensors in Paper registration. What else do we need to do.
Ricoh Aficio...
Toner coil cleaning works on several days and when the problem occurs again we disable the waste toner sensor with SP codes. Toner Consumption counter turn off, and the message did not appear again....
Already replaced the toner coil and tube, cleaned the waste toner sensor, checked the coil out in waste toner. everything is ok, but toner pump and hose are not yet checked. Any advise again? thanks....
Hello Guys, we need your advice regarding my problem on our office copier, always showing "waste toner is full" message, while printing the logs we got also SC495 and SC334.
We appreciate your...
Yes formatting HDD works! Thank you so much. No need to do the firmware upgrade of GW. It's fine.
Hello Gasino,
Thanks for the reply, could you give me some procedure how to do this two things.
We cannot also print using SPcodes :(
Hello Guys,
Would you be so nice to give some advice on what we encounter on our copier. The machine is able to ping in the network but the WEB GUI was unable to access "404 Not Found". When we...