The 94,000 error code is to do with the drum maintenance. At which point of the Power Up cycle does this message show up. Could be the drum is not getting hot enough.
Type: Posts; User: jameschiu
The 94,000 error code is to do with the drum maintenance. At which point of the Power Up cycle does this message show up. Could be the drum is not getting hot enough.
It could be the network card on your computer. Power Management has been enabled. Often, the Network Card does not know how to wake up after it has gone to sleep. Disable Power Management on network...
The toner is also known as TN-3185.
I have not seen No. 80 Printhead for this printer. However, the No. 88 printhead has an expiry date. I suspect the No. 80 printheads are the same and could be expiring in the same year but different...
You are right. On the status page, there should be % coverage used for individual colours. Based on this usage, the printer reports an estimate on how many pages (and %) are left. If from now the %...
Thanks for the feedback. I have swapped the magenta drum with yellow drum - same problem. Refreshed the developer and same problem. It points to Magenta Developer Unit (probably developer toner has...
Trying changing the chip on the yellow toner. Could be the wrong chip!
Your colour pages must be about 1 cm from the edge of the page that feeds in...if you are using compatible toner. The compatible toner is too thick and sticks to the fuser. Good luck.
Check/replace the waste toner unit. A broken gear would cause this error message.
There is a flag gear (white for TN-2150) and Black for TN-2130 which is used to reset the counter in the printer. Turn the flag to the other side (about 11 O'clock.)
Good luck.
My client's FS-C2126MFP+ prints very faint magenta. It is a brand new magenata toner cartridge and the status bar shows 100% (very faintly). After some test prints now the magenta is not showing on...