Search:

Type: Posts; User: egpatl

Search: Search took 0.01 seconds.

  1. Replies
    11
    Views
    6,482

    Re: Scan to email using GMX SMTP server

    Both those protocols are for receiving yes. However, with GMX, if the box isn't checked the machine won't be able to send via SMTP. I just tested it again with one of our test emails. Box checked,...
  2. Replies
    11
    Views
    6,482

    Re: Scan to email using GMX SMTP server

    Does the account have the box checked for Enable access to this account via POP3 and IMAP under email settings?
    Most of the copiers we have used GMX with won't work if it isn't checked.
  3. Thread: Colorqube 9302

    by egpatl
    Replies
    3
    Views
    591

    Re: Colorqube 9302

    Unscrew the thumb screws on the back and slide out the tray. The hard drive mounts to the bottom of it.
  4. Re: Ecosys M6535cidn Pauses after two or three pages print

    the dead giveaway is that it will feed from mp tray fine, remove the feed roller ass'y and look for the spring that holds tension on the pick up roller if its missing that's your issue #302LV06040...
  5. Replies
    13
    Views
    8,544

    Re: DP-770 and lift issues

    Hey guys, we have had this problem several times if you go to simulation 243 then open top cover of the feeder and cheat the interlock with the cover open run the lift option if the lift tray works...
  6. Replies
    13
    Views
    15,087

    Re: TA 3500i - Jam 4411

    What we have found so far is to replace the photo interrupters and clutches to fix the jamming
  7. Replies
    33
    Views
    7,206

    Re: The TA 8000i fuser problems

    hey i was looking at your post, do you have a part number for this jig ? thanks :)
  8. Replies
    3
    Views
    2,510

    Make sure you are working on the scanner IP and...

    Make sure you are working on the scanner IP and not the printer IP. The KM-6030 uses the old style scanner interface not the Command center. Hopefully this is helpful.
  9. Replies
    4
    Views
    11,451

    Try doing U906 then inputing the correct date and...

    Try doing U906 then inputing the correct date and time. Had to do this today and it worked for me.
Results 1 to 9 of 9