Search:

Type: Posts; User: Lindblom

Search: Search took 0.01 seconds.

  1. Re: Will GR drums work in an FR machine? Just for printing, no master making.

    Yep, they're both S-2806. Feeling confident. Thanks, ddude!
  2. Will GR drums work in an FR machine? Just for printing, no master making.

    Hi,

    I have been looking around various threads in the forum, but haven't found a conclusive answer to the question of whether GR drums will work in an FR machine, or if they will cause trouble.
    ...
  3. Re: Riso FR3950 doesn't make masters, covers entire page in ink

    Tried it and it has since worked. If it all goes south again, I'll swap out the ribbon cable. Thanks!
  4. Re: Riso FR3950 doesn't make masters, covers entire page in ink

    It's 120! And 117–119 are different line patterns.
  5. Re: Riso FR3950 doesn't make masters, covers entire page in ink

    The internal check board print worked fine, so that's good at least. I was thinking of taking the scanner out and putting a scanner from another FR. Is it as simple as just switching them out or do I...
  6. Re: Riso FR3950 doesn't make masters, covers entire page in ink

    I haven't been able to find any instructions on how to perform the system reset. Do you know where I can find it? The TPH seems fine, as the machine could do an internal print.
  7. Re: Riso FR3950 doesn't make masters, covers entire page in ink

    I'm using the scanner. And update to the update: It's not just the pink drum, it's all of them. It worked fine again for a little while on a few drums, but now it's back to covering the entire page.
  8. Re: Riso FR3950 doesn't make masters, covers entire page in ink

    UPDATE! It seems that only the fluorescent pink drum has this problem. Tried a couple of other ones yesterday, and they worked fine. Could it be something that's gone wrong in the pink one?
  9. Riso FR3950 doesn't make masters, covers entire page in ink

    I recently bought an FR3950 that hadn't been serviced in a while, and after a few months usage it has now stopped making proper masters. It started with the master having a strip at the bottom where...
  10. [Error Code] Re: RP3700 won't make masters, says master is still on drum even if there is none

    36499

    As I said in the original post, when running test mode 300 I get long beeps from the Master Disposal Jam Sensor. However, if I touch this plastic hook thing the beeps are suddenly short, and...
  11. [Error Code] Re: RP3700 won't make masters, says master is still on drum even if there is none

    Thanks for the advice. It seems to be something else though, as the paper through the master making unit did not remove anything. It seems like nothing was stuck in there. A technician will come next...
  12. [Error Code] RP3700 won't make masters, says master is still on drum even if there is none

    We're having some problems with our RP3700. I have seen other similar threads on the forum but I have not been able to fix it using the advice that has come in on them.

    What happens is as follows:...
  13. Replies
    3
    Views
    1,876

    [Misc] Re: Paper weights for Risograph FR3950

    Thanks! I had a feeling that this was the case. I will try some more!
  14. Replies
    3
    Views
    1,876

    [Misc] Paper weights for Risograph FR3950

    Hi,

    I'm wondering if people with FR3950's would share how thick paper stock you have been able to print with good results. We have heard that it is not recommended to go over 220 gsm or so for our...
  15. Replies
    1
    Views
    1,000

    Help! FR3950 paper feed area trouble

    Hi, we're having some problems with our FR3950, hoping someone can help us out here. When we try printing the paper, at least thicker ones, won't go all the way into the machine, whereas thinner ones...
  16. Replies
    1
    Views
    1,038

    [Misc] Colour drums for Risograph FR3950 EP

    Hello,

    I am pretty new to the Risograph, recently bought an FR3950 EP, which I'm having a lot of fun with. I am now about to buy some additional colour drums and have a question that hopefully...
  17. Thread: Hello all

    by Lindblom
    Replies
    3
    Views
    436

    Hello all

    Hi,

    I'm new to this forum and it told me to introduce myself a little bit. I'm not sure if anyone actually reads these things or not, so I'll keep it brief. I've just started a graphic design /...
Results 1 to 17 of 17