Any body know how to readjust the printhead to align at the edge of the paper after new belt installacion?:eek:
Type: Posts; User: Papo
Any body know how to readjust the printhead to align at the edge of the paper after new belt installacion?:eek:
Has any body found a perfect setup for dv toner setting seems like the toner sets up on the overtone side too much toner . Is there a differen setup for the xerox version 5614
Yep I sort of feel the same thing about this dv unit Thanks for the help.
Ive got a p/manual now thru the manual download service offered here at Copytecnet and solved my p/n needs. May The good...
Does anyone know the p/n for the gear in dv front section turns the mag rollers and gets drive from the gear that sets on the front plate that has a bearing. And where is all that developer coming...
I know it sounds wierd but i solved this once with crop 14 reset.
If Any one Can Share the 810 parts and service manual you will be blessed!
Chaplain Calimano
Can Any one share how to go into simulations and clear this counter im doing a full pm on this Baby! Also developer setting code. Thanks
787-203-9263
Robert :cool:
Customer/friend calls me on vacation cant help him dont have the code to clear waste container code can any one help?
Im on vacation aont have acssess to my books and a customer calls me up with the waste container light he cleaned the bottle but the counter needs to be cleared can any body send me the code...
[quote=copygirl;56175]To upgrade the firmware you'll have to take the big square cover off the back. The slot for the compact flash is in the upper right on the side. You'll see it once you take the...
This problem on the machine goes into a please wait situacion never gives you a code but when I remove the feeder plug It reaches ready condition.
When I connect the feeder It doesent work !
...
[quote=Techead42;24064]I'm coming back into the industry after about a six month hiatus as help desk/tech support (the desk job drove me insane) and have been hired to work on Oce products...I've...
Yeah i increased waste toner dispense and decreased new toner drop rate Do you know of any modification that may correct this problem this is one of the first generation 810s almost 3 million copies...
[quote=Baphomet;55852]Check the auger that moves the toner into the developer that it is not missing part of its spiral.[I wonder if there is a modification for this dv unit seems like the auger that...
Every 10k to 20k we have to empty out the toner from the recycle resovoir and conduits. Theres no obstruccion or malfunccioning components is this a common problem?
...
All mecanisims are working toner flows properly with out cloging up the problem is too much toner is getting into the recycle conduit . Ive adjusted the drop ratio on hopper digital adjustment...
ask the customer if the feeder lays completly flat when he closes it somtimes it does not close right on one of its ends so that would be a broken hinge problem.
Tou must spin the white half way gear in the green drum cover all the way to the opposite dirreccion so that when the customer Installs a refurb drum unit it can reset the drum counter automaticaly....
Whats the proper wat to adjust the fuser pressure on this machine?
rollers are new and web is turning properly:confused:
look at the transfer corona underneath drum it breaks clean inspect for arcing evidence.
charge is your next suspect.
Cant find any documentation on this model need to darken up exposure and adjust vsg how do i get into sim mode ? What code should i use?
Any help would be apreciated!:confused:
take your bellt copy cartridge out turn belt drive dog clock wise you should have a clean belt 1 full rotation of the pr belt if you still have bands after 1 full belt rotation you have a bad...
I coordinated services for sometime and also fixed a few Ill share what I got.
Try looking on the net to see if anybody postedthat license your looking for on-Line Search Xerox 8825 ScaNto net...