once you've vacuumed everything 302LH94342 seal set probably needs to be replaced as well...that is if you can still order them
Type: Posts; User: Scottb
once you've vacuumed everything 302LH94342 seal set probably needs to be replaced as well...that is if you can still order them
302FT20120 is the number for the 00 series
2LH-0016 (D159)
this happens to be a 7003, but it appears to be the same grease as a 00 01 02 03 04 from 40 to 80 cpm machines gets on your arm while doing pm's. I had one container, but cant remember where I found...
Does anyone know the part number for the grease used on the drum drive shaft?
here was the sequence.
at startup it would 2950 then immediately reboot
after that reboot it would 3800 and then immediately reboot
other times it would come up with a 3800 first and not...
[906QUOTE=KYO_OEM;2371527]Please remember scanner-/ engine partial operation function!
You has to run U906 after C3800 until the problem would solved in total, otherwise system will always coming up...
Sorry for the late reply. The isu plugs into the main pwb via a ribbon cable.
turned out to be the engine pwd....in case anyone in the future has said issue....
This machine has a 3800 error code. We have replaced the ISU and ribbon cables along with the main pwb and current firmware. Has anyone seen this issue and remedied the issue?
Our company just purchased a print shop with 2 Riso's and both are misreading the toner levels. The current toner tube has less than a 1/4 toner used, but the display is showing, that 3/4 toner of...
is this why the board was originally replaced.
The 00 and 01 series run dirty due to lack of or worn seals. If you can find one 302LH94342 seal kit will go a long way in helping this issue.
To clean you will have to start by removing the back...
Thanks guys, I found it.
System menu> Function Settings> fax> Prevent Mis-sending settings> off
can someone please hold my hand and give me a detailed walk though on how to turn off the fax number confirmation
Thanks for the post this has been tried and no change
Thanks for the post, but this unit has been replaced and the issue stayed the same.
actually no i have not cleaned the mirrors because i noticed the issue was still in the machine when I was in U952 doing the internal print calibrations. I just made a copy after the fact because I...
It looks like there is plenty of image on the belt, so I guess that narrows down to the secondary transfer on the machine side because i did replace the whole conveying with a known working unit....
eco print is off
hello all,
so we got this gem in off the wholesale truck, and it had light internal prints. I figured, that it had been robbed of the good and replaced with old drums dv and such. I ordered a MK...
will the oxidized work if so katun still shows them
https://www.katun.com/kolc/Search/SearchResults.jsp?searchType=13&searchNumber=2&GotoPage=1&u=221638
thanks guys, i was finally able to log into canon...here in the US the parts guaranty expired 06/2020
Im having login issues with canon this morning. Can someone tell me the parts discontinuation for the Canon Ir Adv C2020/2030 series.
Thanks in advance
could be...its cramped and they are always in a hurry. we have brought it in the shop but I havent had the time to check it out. I'll post the problem when I find whats wrong...
thanks everyone for...
not to get in the middle of reset or not...
Just log in to the Command Center change the Host name and it will show up on kfs so you can tell who is who and new from old