Yes. Sorry. X3220
I'll edit the original post. Thanks.
Type: Posts; User: Ginbolero
Yes. Sorry. X3220
I'll edit the original post. Thanks.
Hi. Is there anyway to set the default copy settings to black and white on the copy screen.
I have saved a program with B/W settings to the home screen, but can't find how to change the defaults of...
Thanks Radiscar!
Hi all.
Does anyone know if an extra 2 cassette unit for a ir adv c35xx series will work on a DX39xx?
The part numbers are different, but I haven't got one check if the connections are the same....
Hi. I have an error 161-4050
Customer has fitted a new printhead, but inks ran out before printhead had finished setting up.
Engineer has fitted a new purge unit. Still have this error after...
Hi. I have a customer with an Altalink C8045 that has to be re-booted after going into sleep mode.
Pressing the power button does not wake the machine, It has to be switched off and on with the...
Update:
Format HDD option, came back to life :)
Hi. I have a Xerox B400 with an error 117-357 which I think is a firmware error.
The screen says UNKNOWN when it boots.
I am trying to re-load the f/ware by USB, but it gets stuck on 12% and...
Hi. I can't find the Toner reset for this machine.
It's the model with no physical keypad.
Similar dcp machines it's Back and x button the back again i think.
Would appriciate any advise please....
46201Anyone seen this before? The fault had gone and was printing normally when I got to the machine but I would like to know if it comes back.
Hi. I have a user with the error 065-225.
I get this error when scanning / copying double sided only, before it starts to feed the original. Single sided is ok, so I think it may be the scanner in...
Total pages 250k
No error on auto cali
No consumables are near end
Reg. sensors are clean
I don't have a service manual.
If this was a ricoh or a canon I could manually bring the colours into...
Hi. I have a user with an Oki c9655 that has blurry print. Both magenta and cyan are not lining up with the yellow or black. This happened after fitting Non Oki drums.
I have registration adjust...
Thanks for the replies guys. I'm glad it's not just me doing something wrong!
Firmware would make sense, why some are quicker than others.
I'm going to make a note of f/w versions when I do these...
I've been replacing belts and service stations on the t1100 series and upwards and I'd like to know why on some the time to prepare printing system is so random. Done one yesterday that took an hour...
This isn't going to work, I can't get one page out of it. Not sure what bright spark at HP wrote that :confused:
I'm beginning to hate these boxes too.
If it's a problem with the ITB, what...
1) Can't find alienation test on this model
2) This won't print anything and there doesn't seem to be an on screen error log but it's less than a year old and everything looks pretty new.
3) Not...
Hi. I've had two of these in 1 week, error 59.F0 (I.T.B. Alienation contact error)
I get the same error without any toner carts in.
I know the cp3525 had this error which normally turned out to...
Sorry for the slow response. Turned out the ITB cleaning blade was really worn, AND running " clean inside main unit" must've killed the cyan drum. There was a non canon cyan toner installed but...
Hi. Out on site today I had a Canon ir c2880 with multicoloured lines going across the page. It was obviously the pattern from the autograd/ set up not being removed by the itb cleaning assy.
For...
We have had several of these jamming at registration or at fuser exit randomly and intermittantly.
Most of the time fitting new pick-up and seperation rollers fixes jamming on these things but not...
Hi, I know these aren't "proper copiers" but I'm also gonna post this in canon printers and the HP forum because the print engines are the same.
We have had several of these jamming at registration...
As above posters have said it was wax from the bar. I've never taken one of these drums apart before. Didn't even know there was a wax bar?
The bar had worn down at a angle. Is this common on...
No haven't tried that. With the mpc2500 etc we just changed the pcu and didn't really take them apart.
I'll vac out the waste toner in the pcu, clean the blade and see what happens.
Thanks. I'll...
Definitely genuine toner.