Good suggestion Subaro. I marked the dev roller and the gear on the transfer roller. They did not move! I'll check the Dev Clutch as suggested by Kyo fan, thank you both.
Type: Posts; User: shtrouble
Good suggestion Subaro. I marked the dev roller and the gear on the transfer roller. They did not move! I'll check the Dev Clutch as suggested by Kyo fan, thank you both.
Thanks Subaro. Toner level is working fine. It has to be the Dev Unit.
Thanks Subaro. Selecting New Developer fixed that problem.
However, it is printing blank pages. A quarter of the developer roller has very light coat of toner, the rest is still silver in color....
Hi, Got a problem with FS-4300DN. Firstly printing blank pages. Replaced developer unit and drum. Kept prompting for new toner even new toner was put it. Any ideas? Thanks
Alternatively, I created a document for each colour with different horizontal strips (about 2 cm wide) of shades of the colour (dark to light). This could be used on different makes of printers too!...
Find out which toner is out and replace it. Should be able to do that on the control panel (supplies status). Shaking the toner will not make any difference. If it is a new toner cartridge, then the...
I get mine from
Imaging Solutions (AustralAsia) Pty Ltd.
Sydney
2/20 Wilmette Place
Mona Vale
NSW 2103
It might not be the PSU but overload.
Just over a month ago, a client asked me to check why his A3 colour laser printer worked 1 day and not working the next day (does not power up at all as if the...
Check paper size, tray, printer diver on computer and document page size sent to print. Ensure they match. Had a customer complaining similar problem on a Xerox printer. The printer was set to wrong...
I suspect there is something in the gear. Had a similar situation where a piece of white paper was jammed in between the white gears. Difficult to see of course unless you go looking for gears...
Check the gear with a spring, the spring's tension could be off.
The drum has a chip and collects waste. Replace the chip and also empty the waste toner.
Attach a sample.
Sorry. Here it is again
See Attached
Load the page.
Been through that. Does not matter OEM or non-OEM cartridges. I was told, it was like that from day 1.
See attached picture. Note that the colours are not in the box. The centre is aligned, if a bar...
Had similar problem with a HP 4000. The shutter of the print engine laser unit lifts (move away from the laser unit) when this cover was shut. The plastic (part of the cover) that did the job was...
Thanks.
Tried this ... a few times.... and still the same problem.
Hi, Anyone knows whether the drum unit for OKI C9300 will fit the Xerox Phaser C7300? Thanks
Are you using Windows XP or Windows 7 32-bit?
Hi Fbkhan3,
I have seen problem printing from black cartridges (on HP 4600) no matter how many I have replaced. It turned out to be the colour cartridge next to the black is causing the problem. Try...
HI, A client's HP CP3525 colours are all out of alignment. The Black is fine. Is there a way to re-align the colours? Cannot find anything in the service manual (...or have I missed it?). Thanks.
Check out this link HP Communities - LaserJet 2605dn "79 Error" - Enterprise Business Community
Brilliant!. Thanks Ramil.:)