Hi,
There has been earlier discussions about these problems in the past years, and I know the quality of the SD cards has been a known issue. But lately this thing has exploded on our hands....
Type: Posts; User: 484
Hi,
There has been earlier discussions about these problems in the past years, and I know the quality of the SD cards has been a known issue. But lately this thing has exploded on our hands....
Interesting. I'll have to make sure those timers are not set to the same value. And have to check that curl correction. But, as you said, it's probably just unrealistic expectations.
Well, in any...
Drop me a private message if you still need one.
Hi,
Has anyone had any trouble with either the Gemini Plus or the Aries series shifting to preheat mode too early? We have two cases like this (MX2310U and MX3110N), and the problem is, they're...
Oh, right, that was it. Running sim 61-01 makes that noise every time.
I don't know where you guys get your units from, but ours are shipped from France, and even the new ones, just out of the...
Is the noise very high pitched? If so, I'd say this is more of a feature than a fault. I've assembled several units of both MX2640 and MX2614, and from my experience I'd say they all keep making...
Thanks for the reply!
I'll test one device tomorrow and see what happens.
Hi guys,
I was wondering if any of you have come across an issue with newer MX26xx machines. I've encountered atleast five individual devices with a high pitched noise emerging from somewhere...
Well I suppose the firmware we used was for the correct finisher as its filename had the addition MX2300.
Additionally, we also tried the MX2300 finisher which came with the compatible FNX1...
Yes, we have updated the latest firmware for both the machine and the finisher. The finisher was updated with the FW version that is specifically compatible with MX2300 (to eliminate the possibility...
Hi there,
We have some headaches with a combination of MX2300 and FNX1. The papers come out unharmed and get pulled back properly, but atleast 1/3 of the papers are not aligned properly after...