Search:

polygon moters have nothing to do with sc 322

Laser drive units are conected to the bicu board through a microswitch on the upper right cover, verify the flat cable that conects the ld drive to the bicu and finally verify the ldd unit if it is...

i´ve got that manual contatct me at jctechbr@gmail.com

you should try updating the copiers firmware, actually the printer controllers firmware. i´ve got them contact me at jctechbr@gmail.com

i got that firmware. contact me on my email. jctechbr@gmail.com

i´ve got this firmware update if you want. contact me jctechbr@gmail.com

did you solve the problem?

change your toner cartridge and if it still get you clear copys try verifying the power suply board and it tensions.

hello friend, probably your laser drive is defective, and the only way to make work perfectly again is to disassemble it and clean every part, then seal the openings of the unit in order to keep the...

i´ve got it´s service manual and system for instalation if it helps you just let me know.

The bushing of the 1st and 2nd tray are certainly in need of some lubrification i had this on my machine after long printing jobs, you should put some oil on it and then spread it over by activating...

Hello,
I think the only difference between them is main motor speed so you should try changing these motors and check if there is any configuration on the sp mode that allows you to change the...

Hello pal i got these manuals would you trade on sharp ones?