Search:

Thanks C_T I'll check that out today.

Ron

HeeHee, I've seen this one a couple times and with the few ir6570 copiers that I have had that had this problem it has been the fan assembly is broken. So what you will notice is that when you remove...

Sorry for the late reply, it's been a crazy month but thanks for all of your help guys. Though after using all of the previously mentioned tricks and potions, the irc 4080 copier is still not...

So this is another irc4080 that I just purchased for resale and there is a little problem, this screen shot seen here will not update, everr.
...

Thanks guys.

Ron

http://i8.photobucket.com/albums/a3/ron629/IMG-20131218-01915_zpsacf10d13.jpg




I'd like to say that the error codes are totally random but then I'd be wrong. There seems to be a...

I'm not familiar with that particular problem but I do know that as a rule all copiers should be fairly close to level. A very effective and yet simple way to test this is to put a steel bearing in...

Here's a few more ideas. Firstly, have you actually run a set of test leads to the solenoid itself and tested to see if it does get 24Vdc while you are running the service test for it? The reason why...

I'll check the Cyan drum when I get to the shop. This copier prints blue only from my computer. It prints perfectly fine if I copy something from the glass or the ADF or if I generate a "user...

http://i8.photobucket.com/albums/a3/ron629/IMG-20131210-01860_zpsf2df51ec.jpg


So I'm just starting to remember why I stopped working on color equipment a few years ago, it's stuff like this. So...

Have you taken the Lower fuser roller bearings out and seen if they have seized? If so replace them and the lower roller. Though in saying that the 5000/5020/6000/6020 copiers didn't have that...

Thanks for the speedie reply guys and yes I do have the cabling for hookup. :)

Ron

These open framed DC type solenoids almost never ever fail, actually, I've never seen one yet. before ordering one you could just check it with an ohm meter first.


Ron

I recently worked on a similar wide-format machine with a similar problem. Just re-seated the ribbon cable that leads from the print head assembly and tadaaa, no more errors. Give it a try, though I...

As mentioned by Teckat, this is the time of year for crazy high humidity in paper. To quickly test this out, just take a piece of paer from the paper cassette and crumple it in your hands, if it...

I like that re-seat idea mentioned by the previous poster. You wouldn't believe how many bizarre problems have been solved by re-seating the connectors on the main boards. This one looks very much...

http://i8.photobucket.com/albums/a3/ron629/IMG-20131206-01842_zps444f5a14.jpg


http://i8.photobucket.com/albums/a3/ron629/IMG-20131206-01843_zps553baacb.jpg


Okay, so I've networked probably...

I had a similar machine do the same thing, at least I suspect it. Anyhow what would happen is that first thing in the morning when the copier was turned on it would cycle a paper from one of the...

Or as the customer might say :


- There are lines on the paper
- I can't read the copies
- There is something wrong
- I hate this machine
- I want a new copier

It sounds like a good idea. I had never thought about the mechanism failure potential though but I'm sure that you could inspect that before a refill and there is a seriously high demand for...

Thanks Teckat !

Ron

http://i8.photobucket.com/albums/a3/ron629/PortCoquitlam-20131107-01711_zpscde7063a.jpg



In the above picture you will notice that at the bottom of the display there is a warning saying "The...

Thanks guys. You are right, the GP18 toner worked just fine even though this copier model is not listed on the box. Go figure?!

Ron

This might be a little late for a response but the problem is more than likely the digitizer screen, it's that thin screen that excepts the touch signals from your finger when you touch a selection....

What is it with this toner? I'm currently assuming that the GPR-18 toner that I just ordered will fit into a client's ir2025i even though it is not listed on the box or in many other reference...