Hi... For first, you can take out all items attached to the process carriage... Transfer belt, drums, coronas and Dev Units. After this, close the process and check if it fits ok in position. This...
Type: Posts; User: Rocini.jr
Hi... For first, you can take out all items attached to the process carriage... Transfer belt, drums, coronas and Dev Units. After this, close the process and check if it fits ok in position. This...
Hi Everyone!
Please, I'm looking for some light here... I have the C2403 error on the C6500. Error due to Cyan erase lamp. But I can turn the lamp on by the I/O check mode, as the other colors as...
You're right Desert!
The rails can be out of position, cause the screws can untight by use (open and close)
So, the Only way I know to fix it is take off the whole drawer and ADU to do the Job....
Hello!
Be carefull with the drum and corona (Y), but, usually, check CAREFULLY all high voltage contacts, specially on the the drawer's back, where you can find contacts for the drums, coronas,...
Hello,
I'm an MGI tech, outside USA, but I saw this problem before on a DP-60.
After expending hours in this issue, I found the problem. There are some gears (unidirecional) in the paper exit...
Wich size of page you're printing? a good way is try some A3 pages in sequence, to see if you have a pattern on the spots between the pages.
Did you make the toner density/gamma calibration after...
Hello Cookr....
If I remember, this happens cause the default Fiery configuration... You have two specs for default kind of paper to run internal pages, like configurations page, PS, PCL, etc......
Hello Prince,
I did a lot of tests, with papers from 90 to 230gsm. On thicker papers the problem was bigger.
Well, it's interesting, cause the registration (magenta color) was going out only on...
Hello guys...
I expect someone clarify my ideas...
I have a trouble with a C6500, with the magenta registration...
When I try to print something "imposed" like greeting cards on an A3...