Of course check the printer settings like Phil B. had mentioned. Make sure that you have the correct print driver.
Type: Posts; User: 'Tomas
Of course check the printer settings like Phil B. had mentioned. Make sure that you have the correct print driver.
20 years I started in August 1998.
Hi, if you are still having this problem and you've tried everything mentioned. Check, and make sure that the paper pressure mylar is not missing. It is glued to the cover above the sensor.
Thank You Mikon. I did however lubed all moving parts in the ADF. I also cleaned the moving parts in the ADF. I did not used the cleaner in the bulletine you sent me. I will try again with an...
Ok guys, I have a jamming issue with a MP7502. What happends is the original will stop at the 2nd skew correction S. The original only jams when scanning. Never when making copies using the ADF....
Yes, DV initialization was done at installation of the PCU and it's an original Type 1027 unit from Ricoh. It's a new hopper that I installed, also, from Ricoh. I recently brought all firmware up to...
OEM-YES. I mention to customer some time back, if anyone of her employees might be handiling the hopper lever for some reason. She's not sure considering she goes through front desk personnel...
Hi, I'm having trouble fixing a constant toner leak on a MP3351. I put in a new hopper and a type 1027 PCU. Not to mention that I made sure that the hopper and PCU are in constant contact with each....
Thank You all for your attention. I new this particular situation was gong to try me. This person who was providing the "VOIP" service had my customer convince that it was the machine with the...
Can anyone advise me on how to give reliable fax service to my customers who are now using "voice over internet protocal" "VOIP". Thank You!!
Did you stop the copy process? If so does the line originate from the process unit? If so, check and clean or replace the MC.
try sp's 1907 and 1908 I don't think this model has motor adjustments but if it does it's worth a shot. Also you might want to tighten lift spring if there is one and or add polywasher to feed shaft...