Working on this machine. I have changed all but the HV board, same result. No scanner bulb, and the scanner acts like it want to move but is locked up. Have removed the glass and the scanner moves...
Type: Posts; User: tankumus
MX-M503N getting power but no display or scanner bulb activity...
Working on this machine. I have changed all but the HV board, same result. No scanner bulb, and the scanner acts like it want to move but is locked up. Have removed the glass and the scanner moves...
Been there, done that, bought the T-shirt!
Service and Parts Manual Needed
I am looking for the service and/or parts manual for a Canon ImageClass MF4350d. I do have plenty to trade if someone needs another manual. TIA
AL-1642CS
Looking for paper feed rollers and sep pads for this model. Does it cross to any other model specifically or is the 1640 series all the same on these components? TIA
Tankster
UPDATE! The part I am needing is "1407 5751". It is the small 8 pronged IC on the BCU. Anybody know where I can get one?
I am in search of a new or used BCU for a Ricoh Aficio CL 7000. Part No. is G080 5053. Anybody know of a source other than Ricoh that I might try?
Well Jan, I see I am not the only one you are rude to! If you are not really going to help, why not just stay off the forum? Seems you are only here to be a smart alek to people who are here for...
Jan,
You didn't give me any information that didn't already have. I have the service manual! It seemed you were talking about a different mode other than SP mode. And just for the record,...
Eureka!!! The problem was the small 8-legged IC in the center of the BCU board. Replaced with a known working unit and problem solved! Still looking for the firmware though. Any help would be...
SORRY! If I offended you Jan! I was just looking for a little help. We are a small company and probably don't have the resources you do, but we do have the technical savvy! And manners!
scanrouter is pretty easy to use. Just make sure your delivery server IP address is set correctly. If you are scanning to email, ScanRouter lite will not work. You would have to setup the scan to...
I have checked the serial number, it is entered correctly. I ran a few test prints before I reset the maint. counters and all seemed fine. How would I get to "Factory" mode to re-enter serial...
I have a CL7000 with an SC195. I just replaced the transfer cleaning unit blade and the transfer belt. I reset the maint. counters for these two items and upon a reboot I get the SC195. Also when...