At this point, they may be replaced with newer model.
Type: Posts; User: guru
At this point, they may be replaced with newer model.
It is OEM toner? if not good luck ..
The code is related to the left cover safety switch. It's has 3 switches in one, if one of them is not closing right the code will pop up. Make sure the left cover is closing OK. Sometimes finisher...
Check if the pivot post of engaging lever (white lever) in paper feed unit is not broken.
Duplex unit has 2 couple of white pressing rollers. Stretch the pressing springs about 4mm. Timing is delayed due to lack of pressure. Also check condition of the one way gear in feed switch unit.
Enter to Simulation pressing STOP ENTER and turn on machine, press STOP again. Go to SIM73 and enter 999999 (in pairs: use exposure keys and hit enter for each pair of numbers). That will make the...
Linux is running the machine. This machines go on sleep time most of the time and the OS gets slower with the time . I asked the users to cycle the power every week to keep the machine speedy. I...
I had this problem before and everything I replace never fixed this problem. Floor flat, move around machine, no change. So the user tried many paper brands until one of them was reliable enough to...
I have the same problem, followed the manual procedures, OK. Machine is due for PM but user don't want to spend much money on it. Wonder if code is related to PM
C11A4 Saddle exit motor failure
Codes for FS C5030N
With generic toner you will see toner on the transfer belt toner on the back of simplex copies toner "baked" on the mag rollers turning them a funky grey/black color.
Also clean mag rollers and...
Replace Fixing Unit. Thermistor is not working properly.
You may try Sim U074 "Adjusting the DP input light luminosity".Increasing the setting makes the luminosity higher, and decreasing it makes the luminosity lower.
I reload the firmware with no problems. Problem has not changed.
Internal prints in magenta and black
Copies in cyan and yellow
Prints from PC and controller demo are OK
Scans full color PDFs to...
Got a C252 with missing colors. Full color copy comes up in cyan and yellow only, prints and internal test charts in magenta and black. The only internal "test chart" that prints differently is the...
Got a C252
As dqydj said, cleaning and libe the rails will fix this condition. It happened to me twice