Hello All,
So far it the bizhub c220/c280/c360/c224/c284... models we were abble to use the black drum units as color,
but now in the bizhub c258/c308 series when swapping the units black to...
Type: Posts; User: kalimero
Hello All,
So far it the bizhub c220/c280/c360/c224/c284... models we were abble to use the black drum units as color,
but now in the bizhub c258/c308 series when swapping the units black to...
The machine has only 70k and started to print white lines on sub scan direction on all 4 colors.
It is not the fusing because the lines are visible on the transfer belt when i make a jam.
2819828199
Tnx Terver 12
I put a new HDD and it booted up ,
i uploaded new FW and is all good now.
It is strange that the HDD fail is caused by firmware failure, but im glad to see it fixed.
Tnx to all
tnx to all suggestions
tried another USB Stick but nothing happens.
I put the USB, start the machine and nothing happens ,
the screen remains black , no activity whatsoever.
I think that the...
PLS Help
I have done this a million times but today the firmware download wouldn't end,
even after 3h it continued to say downloading on the screen for all of the boards MFP Printer and scanner....
PROBLEM SOLVED , the paper exit sensor actuator is missing :confused:
Tnx northernlife
The Jam code is 010A 01
yup , it jams from all trays and on print and copy.
were do i see the jam code? :confused:
Sry to say but it's not the sticky sound dampers, the gate guide is attached to solenoid , the spring is there and flapper is not stuck in the wrong position.
Here is were the paper jams
23187
Hi all, i'm a KM tech and i just received a IR C3080 that jams in the dupex section.
Paper comes out from the turnover unit and can't go back and jams there.
I rly want to do my costumer a favor...
Quick question,
can i set the drums to NO STOP on bizhub c364 series like it was the case on the bizhub c360 series?
Tnx
On bizhub press c6000 , the machine has 500k
After startup there is clicking noise from the fuser unit and trouble c-3102 appears,
few days ago the customer had a problem whit the pressure of the...
After replacing the cyan IU chip i got an c2650 trouble code, i put the old chip back and the trouble code was gone but the now i have an poor density on all colors and a message appears: "licence...
I hope OutlawTorn will tell us what was the problem?:)
I agree whit ni311 , you will have to show us a sample so we can help you,
bizhub 130f has many image problems and usualy the problem is from the drum or the tonner or as ni311 said the scanner.
developer is not the problem there are many things that could do this problem, check the connector of the LED's in the IU for proper connection, check the drum charging corona also , see if the IU...
To enter SM go : press Utility/Counter , touch Details ,press stop , 0 , 0 , Stop , 0 , 1