Hard to say unfortunately, I don't know how long printer was out of use before I was given it, and I've had it unused for almost a year.
Actually Magenta and Cyan have stickers on them that say...
Type: Posts; User: antwebb
Hard to say unfortunately, I don't know how long printer was out of use before I was given it, and I've had it unused for almost a year.
Actually Magenta and Cyan have stickers on them that say...
So.. I have Good News and Bad News!
Firstly MASSIVE thanks to those who have helped me..
When I started looking round for a Boot ROM DIMM I got an offer to strip pretty much whatever boards I...
To be fair, technically I do still need a screen too, buuuuuuut no point doing that until it's running, ideally I hope to get a test print before I commit to paying for a screen.
While we're on...
Are there various that will work or is this dimm specific to the 3200?
Thanks
Ant
Ahhhhhhhhh, there it is!
Now why couldn't I have found that when I was searching it like crazy?! :confused:
Brilliant thanks teckat, so I'll check all the contacts in the socket and give it...
Boot rom is N.
The boot was stopping way earlier than 3/4, more like 1/10, and was then going blank and restarting over and over, rather than stalling. Machine enters 2 8 download mode fine and...
Thanks teckat, I am aware (thanks to reading through many, many of your detailed and informative posts advising others) that the drive must be formatted inside the machine as you describe.
Can I...
Yeah that's the only firmware I have, what I was thinking was if I could get hold of another version I could see if it will accept it - then if it does, after that from a different starting point it...
Hah that's funny what were the chances :p
Yes it is a standard 3.5", specifically a Deskstar in mine, HDS722540VLAT20, the only problem is at the moment none of my built computers actually...
Well that's a very kind offer! I'm in Weybridge, Surrey, where are you based?
Oh also, forgot to mention, before trying any of this I removed and reseated the two memory sticks, the boot ROM, and the HDD ribbon cable. No change in behaviour, but nothing visually wrong at least...
Hi again all
So I'm finally coming back to this, after life got in the way for almost a year.. (the copier has been "furniture" for all this time!)
Huge thanks to those that helped already -...
Guess it's about time I said hello, I found this site almost a year ago when I was given a (very) broken copier (Canon imageRunner C3200N in case you become intrigued) to try to get working for...
Hi, I have an imageRunner C3200N that was gifted to me (for personal use at home) in quite a state of disrepair - I am hoping for some advice from some of the experienced guys out there on how to...
Hi, I have an imageRunner C3200N that was gifted to me (for personal use at home) in quite a state of disrepair - I am hoping for some advice from some of the experienced guys out there on how to...
Hi sharptech1, thanks for your reply.
I have not yet tried booting the machine again since my previous post as I have been busy, but hopefully leaving it off for a while will be all that was...
Hi thanks for reply, though I make it $139.95 unless that is for whole assembly, in which case I couldn't spot the digitizer separately? Regardless unfortunately I am in the UK and it is rather...
Hi, I was recently given a Canon iRC3200N for free, which, while it has seen better days, appears operational so far..
The biggest problem with it is that the glass panel for the touch screen has...
Hi, I was recently given a Canon iRC3200N for free, which, while it has seen better days, appears operational so far..
The biggest problem with it is that the glass panel for the touch screen has...