Search:

15-7-1

check the isolation mode there is a softswitch turned on

what is your version of system software? and what patches are installed? gr kmcopier

check your PM

YES if you exchange only the IC on the board in the FS, so clone the IC from a working FS 603 and install this IC in th FS 601 and it' works

check if the transferbelt is in the center>... check your output qualtiy a spec yellow because this is the color you touched.

Check your power supply and voltage's

what about the pre drive? the c350 warms up?

cross over cable

Is the black toner recently exchanged?. What is the TC ratio?

there is a cups update for this item

ihpu board

check CSES!

please more information, what are you paper settings on the copier, send me some print screens PM

replace

try R6 boot firmware, if that doesn't solved it MFPB!!

NV ram this is a special one
( real time clock chip)

gr kmcopier

Efi had a special tool ECP installing this system software we work now for many years with acronis true image (X2e CF910) do you have a other Fiery X3e CN3102e make a image from that and install it...

imaging unit!!

there is special firmware for this 59 spec and also solved in 88

<Workaround>
Change the setting time of Low Power Mode setting as longer than the time of Seep Mode settings.
Administrator...

there is no difference there is no chip in the bottle

see other topic remove front cover and insert toner bottle you can see that the holder is the problem check your bottle's you can see the difference.
remove\ cut some plastic from from the holder...

cut out your holder from the toner bottle hopper, so that it fit's
check black normaly this one fits always

check your LU-202/HT-503 interconnection harness to main body

What do you mean by toner door the door in front of the toner bottle's?
9/15 65AA 1205 0 TONER SUPPLY COVER