Search:

Hi Nildera
How do you solved the problem? (sys2 button not present)...
I have tried to NVM Initilization a lot of times without results :(
Thank you in advance for your help!!!

30792

Many thanks!!!
Thank you very much for sharing....

Finally in my case I had to replace the SFP MCU Board and SFP EEPROM Board from a Xerox 6500 (more than cheap 6505 mfp) because the printer never goes into to initial menu always stuck on " replace...

I already have this FW 2.00.06 into the machine but the IBT waste counter still is freezed in 4.155 millions...
I initialized the counter a lot of times without results.... :(
I was thinking if...

Please try with this public link...


WorkCentre 6505 v201203141124
ht**p://www.support.xerox.com/support/_all-products/file-download/enus.html?contentId=121588


In my case I upgraded the...

Hi there!
How did you resolved the issue?
After update the firmware (v201203141124) the problem persists... :(
I am very concerned because the machine is not mine... belong a customer.
Please...

Ok
I will try to explain...(my english is still improving)
Please turn off the printer, then open the main logic board gate (two screws, where you connect USB, network cable. Etc) there you will...

Hi guys


In my case I resolved the problem (communication error) removing a memory (512MB) from formatter slot, I did have 2 memories and I continue with only the 256 mb.


After removing the...