Yea I've been noticing alot of the new machines, MP C6502, MP C4503's.....ect, Have been coming up with SC672-11 codes. I sure hope that Ricoh is also noticing and will come up with a resolution for...
Type: Posts; User: smerritt244
Yea I've been noticing alot of the new machines, MP C6502, MP C4503's.....ect, Have been coming up with SC672-11 codes. I sure hope that Ricoh is also noticing and will come up with a resolution for...
Well the machine is fixed and back in the customers office. Basically, what it took was replacing the BCU and the eeprom on it, AC Control board, and Power supply. I still don't know what happened to...
Well, I did get a little hope yesterday. I changed out the ipu board and the machine made it to the copy screen. Then it threw a sc552-02 code for the thermopiles. After trying a couple restarts and...
I am sorry I forgot to mention that I have also already removed the hdd and fax board from the machine as well. The machine does not have a finisher or any other accessories either.
The machine will not come to a ready state. It just stays on the origional please wait screen. I have tried replacing the ribbon cable bergen the engine board and the ipu board as well as changing...
That's what I was leaning towards but I wasn't completely sure. I'll order that up. Thanks for the help.
I am trying to locate the staple shift motor for this finisher but, I can't seem to locate it in the parts manual. Does anyone happen to know what it is or where it is in the manual?
I am having a problem with a 463 where it seems that the pick arm for the paper tray seems to be slamming down and then back up intermittently. A message will appear on the screen saying the tray is...
Oh sorry. I must have misread that part. I will check into that when I head back there.
I am just curious what it took to fix this problem. I currently have one that is doing this but, right now, it is very intermittent. I thought I had it fixed about 2 weeks ago, then, it all of a...
I am not changing parts to just change parts. This copier has been a problem for a while now and its one of only 5 sharp copiers in my area. I only have around a year experience and I know that I...
We pulled out the ps unit and cleaned it very throughly and replaced the ps roller. That seemed to do the trick!
I will give this a go when I head back there in the morning. Thanks for the advice! I'll let you know how it works out.
I am constantly fighting a jamming issue with one of these systems. The issue is that the copier is jamming from all the trays except for the external large capacity feeder. I have recently replaced...