I had the same problem and it was the PTR. Good Luck!
Type: Posts; User: eccelobo
I had the same problem and it was the PTR. Good Luck!
Check Network - USB Port - Active - OK
I bet it is the power supply. It happened to me. Good luck!
Did you clean the Laser Synchronization Detector?
You just have to unninstall the windows update KB5000809, KB5000822, KB5000808, KB5000802, depending of the W10 version you have.
If you have KB5001567, you have to unninstall it first to see the...
You need to set SP5193-001 in "1", and SP5895-001 in "1", then switch off and on the copier. Check with another ethernet cable if it fails again. Good Luck!
You could also set momentaneously SP3100-001 to "1".
Good luck!
I just use toner for C8000 in both C360 and C364 models and never had a trouble.
The chip is fot the indication of amount. You can use the same chip, it will indicate zero but it lets you print...
Replace D131 3161, it may have the seal broken. Good Luck!
Does it happen with that particular document or with every green?
Try copying with different copy modes (text, photo, special original, etc)
Good luck!
Just disable the PM alert setting SP5931-001 in "1".
This machine does not have maintenance kit.
Solved! It was the yellow drum indeed. I just replaced it and the code was gone.
Hi!
I have a SC693 in a Pro C751 that I recently checked. I cleaned all units and it has a broken charge unit in the yellow IU, and consecuently the drum has a peeled line. So I ordered a new charge...
Since you already replaced the PCDU, I can only think of Transfer Belt cleaning unit, or some light entering from outside (Is there a removed cover or something like that?).
I think you misunderstood, haha.
He meant take the HDD from the copier, format it on a computer, and then put it back in the copier and format again there.
Push the drawer further into the machine, it must be poor grounded.
If it still gives error, replace the shaft AA140946 and the feeler D1351583.
Good luck!
Set SP5051-001 to "1" and SP5515-009 to "0".
Good Luck!
Check your PM
I feel you, bro. My customers have the "I've always done like this and no problem" philosophy. I try every option, like different thickness settings or different brands of paper, until proved it all...
According to Ricoh, both toners carries developer inside the bottle. In C651 is 8%. I don't know how much in C9100, but the formula says Ferrite and Manganese Oxide 1-20%.
Both formulas are...
But why they changed the transfer belt functioning? It lasts less than before!
Hi folks, on one C651 I have the lighter bands described in RTB 99a for Cian, Magenta and Black, in different shapes.
https://drive.google.com/open?id=1nR2C8fE2uen_bzaT0i9gMyB67GmHzUgM
(sorry I...
I'm one of those who uses WD40 for clean feed rollers, but in this machine in particular, I've learned to replace them when jamming (with exception of gross paper dust, like Slimslob says). They're...
Check your PMs
Good Luck