thank you KingPD for all of the useful information. I'm going to digest it all and see how my current job goes as far as having a few spare hours during the day. If I decide to do it ThEN I'll...
Type: Posts; User: Copychick
thank you KingPD for all of the useful information. I'm going to digest it all and see how my current job goes as far as having a few spare hours during the day. If I decide to do it ThEN I'll...
My "boyfriend" and I have been together for 7 years. We've had many obstacles to overcome(ie-children,finances) and have just become empty-nesters in the past year. We know we're "stuck" with each...
So when you say an sub-contractor you're saying that I would be responsible for my own taxes as well? Does that mean I have to register with the state, get an EIN and all that? If that's the case I...
Well, first let me explain that I spent 10 years in a copier reman factory so I have been a "shoprat". It was when I got laid off that I went in the field, so I've been driving 25,000 to 30,000 miles...
Well, the time has come for me to set my screwdriver down and move on to another chapter of my career. After 16 years in the industry I'm going to help my boyfriend run his tool and die shop on the...
Thanks so much! I'll try these steps on Monday!
Hello everyone- I've got this printer that is not printing the correct color. The left side of the page is coming out with a magenta stripe. The toners have been changed, along with the transfer belt...
I will check the doors, thanks so much!
I don't recall the firmware version but when I go back I'll update it, I think it was older. The thing is that the customer moved the machine themselves to their new location because they didn't like...
I haven't posted much on here but I could use some help on this one. Customer is getting a j80 on their DF780. 3 or 4 sheets would exit the finisher and then it jams. I spoke to tech support and they...
Yes, I did try pinging it, no good.
I'm having a problem with a 250. When I arrived there it seems that the machine had been reset; counters were back to 18 copies( it has 55,000 on it). The energy save and backlight on the LCD were at...
Thanks again!!
Thanks blackcat- I thought you would respond with an answer for me! So by how much would I lower the fuser temp?
This machine had a c6000. I tried resetting in u163 but it wouldn't work. I replaced the fuser with a new OEM, machine ran great.... for one day. The code came back again! Any ideas, perhaps main...
The second cassette tray which I put in the first drawer lifted ok and first which is now in the second lifted without coding. They don't sit correctly side to side with the covers. I should go back...
I managed to clear the code after the customer got paper stuck behind the drawer. But when I opened and closed the first drawer I can hear it keep trying to lift the paper then it codes again. I...
You can only reach tech support if you are an authorized dealer. Authorized resellers have to use companies that Panasonic assigned to them for tech support and supply items. I went through the...
Ive been in the copier industry since 1995. Started out as an assembler for a reman facility and worked my way up to a senior tech.
It was a great way to learn cuz every sub assembly was rebuilt...