Search:

Ok I have one more machine at same place I swap complete development unit hopefully we find something.
I can do it on Monday so update will come on Monday.

I double check that is connector properly connected

Dear all,
I hope you all are fine.
I have mp9002 which have copy/print quality issues.
I change brand new opc drum developer complete maintenance kit after fixing all things I go to system and run...

I have 3 kyocera taskalfa 5501i in our print shop.
All 3 have same issues.
When we start printing a file of 3 or more pages it's produced shades in prints which becomes darker after every print....

I have 3 kyocera taskalfa 5501i in our print shop.
All 3 have same issues.
When we start printing a file of 3 or more pages it's produced shades in prints which becomes darker after every print....

Yes you are right first of all we pause printer queue by system and generates 5000 print jobs between 1 page to 25 page.
Secondly waste toner bottle becomes full sooner

Kindly guide me

Hi all,
I have 2 pro 8120s in a print shop, I am facing problem of consuming too much toner, 1 toner bottle prints 25000 pages although in the past I can easily print 50000 to 60000 by one bottle....

Kindly tell me the actual switch number.
I am thankful for you.

Thanks for your guidance.
Kindly confirm me the switch no.

We use normally 70 to 90gsm A4 size paper

I have page numbers in my job so when job starts it stops on page number 150 when we continue from machine panel it stops on page number 300 again we continue it stops on page number 450. I it counts...

I have 3 bizhub601 in my printshop without finisher, only receiving tray is available. When I sent a print job of 2000 pages machine automatically stop after 150 pages and than we have to continue...

Can we adjust print position/ print margins or leading edge and side to side registration adjustment in kyocera 5500i as we can did in Ricoh?
Kindly help

Toner scattered by the development filters located in development unit

Both are from Same model and working condition machine

Today I change hdd with 80gb but issue not resolved even though I also check bicu board and ipu board from a ready machine and also complete drum unit from that machy but issue not resolved.

YOU HAVE SEVERAL ISSUES HERE:
1) what size / weight / orientation of paper should be 1st cassette LTR plain

A4 size 80gsm plain paper is used in 1st tray

anything other than that you will get...

Dear all,
I need support on Ricoh sp9100dn, when I want to print counter or configuration page machine start paper comes at registration and machine continuously runs for 1.5 minutes and after that...

Dear all,
I installed pro8120s with booklet maker. My customer require printed counter of books made by this machine.
Like we print total counter.
Kindly guide me

First of all sorry for late response, I have to inform all that according to your guide lines I successfully resolved this issue by replacing new nvrams.
I also want to inform you that I am...

So I resolved that problem.
The on board nic is faulty so we connect this machine by option nic board use for connecting fiery controller when I removed fiery controller but not removed optional nic...

Thanks for the guidelines I done it successfully.
Once again thanks

I know that we have to save nvram data on sd card
This was done by another engineer.

Today I try to save nvram data from another machine and restore that on problematic machine but unfortunately...

I know that we have to save nvram data on sd card
This was done by another engineer.

Today I try to save nvram data from another machine and restore that on problematic machine but unfortunately...

I know that we have to save nvram data on sd card
This was done by another engineer.

Today I try to save nvram data from another machine and restore that on problematic machine but unfortunately...