Tim C - Here is a pro active cut to the chase quick tip regarding toner bottle errors. Get a flexible wire, an old style coat hangar works best. It will give you the reach needed to get to end of the...
Type: Posts; User: turkeyfoot
Tim C - Here is a pro active cut to the chase quick tip regarding toner bottle errors. Get a flexible wire, an old style coat hangar works best. It will give you the reach needed to get to end of the...
This isnt directed at any person only an attempt to provide useful information.
From ImagePass Color Guide page 2-2 on color calibration:
"When performing imagePASS-C1 calibration, you must...
Customer expectations documentation for the Advanced Color products show to calibrate the rip after gradation and shading correction. Available on E Support
I dont know, basically because I have no reference to post. BUT if the measurement page is off and then used to calibrate the fiery how in the world can the Fiery be calibrated. Im not finding a...
Ill take a stab at that. Ive use cds to appy firmware at fedx. When its not at the machine, the content delivery service will still list firmware that is available though it isnt "yet" at the...
I beg to differ with the idea that a Fiery calibration should be done first. The reasoning is if the measurement page is off then the fiery calibration will be off also. First calibrate the engine...
If you dont know what Im saying then please dont attempt it. It hinges on alot of previous experience. You wouldnt be any worse off trying what I recommended though. (troll alert)
Pull the hd, put it in an enclosure and format it using windows and fat32. Then do an allformat and system firmware.
You forgot to say whether this happens on a copy or a printed image. Thats the best way to divide and conquer. When you get your hands on a service manual you will find a process where you can print...
Ooophs, D0415750:DI-CIC and D0415740:DI-C1A
I use Savin nomenclature. I'll try to put this in the Ricoh realm though. I'm not getting something about the C2030, C2050 C2550 controllers. I have a C2550 with a no print condition, pinged it,...
Taking an interview with this co who allied with Xerox to sell small to mid sized copiers. Located in the Wash DC, Balto, Nova area. Interested in opinions. Thx
Thx for the timely info. I found the Ricoh site down for tech bulletins. It must be Thursday.
Thx!
Even a blind squirrel finds a nut once in a while. :D
Ive looked through a ton of sp codes, nothing yet, can you tell me how to calibrate the screen?
Can the op pnl be intialized on a 4500 for a desensitized area ? The lcd doesnt respond in certain areas.
Thx gents. No apparent wear on the opc but I replaced it anyway with excellent results. And its been that way for 2 days.....
I saw reference to that in Gooses guide. Thx for the post.
During copying and/or printing it crashes with sc990 or 991. The firmware are bin files and there is no remote firmware. Can the Mcericoh demo software be used with a standard pcmcia card to up load...
Ive seen a similar problem when installing a print driver; it didnt see the sorter stapler etc until it was set up in the driver under a tab I cant remember. My particular customer tried the RCPS...
Oce keeps a tight lid on their svc manuals. To effectively work on the 900 you have to use the manual and service tooling called sds to connect via laptop - both password protected. With only the...
Depends on where you live as to how much you make....
I did a cost of living comparison between Wash dc and Hattiesburg Ms. For $29,557 yrly you'd need $44k up here.
Its been so long since my...
I agree with Cobiray. Forget about trying to print over ethernet. Every embedded fiery Ive worked has a way to navigate thru the display to do a setup. From the fiery menu if you can generate an...
Im a tech thats going to work with a Panasonic dealer and wondered what interface cables are used between a laptop and the m/c when you have to upload firmware. Ive got to make sure the laptop will...
Is the 5000 and 1000 really more the same than they are different?