Konica Minolta/Kyocera Mita/Fax/HP/ Xerox /Panasonic/ Risograph/Franco-Postalia / Neopost/ Hasler, Tech seeking employment in the Seattle /Tacoma area, as Wife wants to move back to area and willing...
Type: Posts; User: higherlevel
Konica Minolta/Kyocera Mita/Fax/HP/ Xerox /Panasonic/ Risograph/Franco-Postalia / Neopost/ Hasler, Tech seeking employment in the Seattle /Tacoma area, as Wife wants to move back to area and willing...
as the basic screen shows before shutting off. My first time it took me 3 attempts before I got it.
works on 350, 351, and 450
YOUR TALKING ABOUT BLACK AND WHITE MACHINES HERE AS C450 IS...
You won't find a Fuser Roller...its all 1 unit on this machine !!:mad:
Sent the Service and Parts Manual...;):o
Good Luck !!:cool:
You can find them on Ebay I see...of course we are a...
Need a Service Manual...What is your Email..?
Fuser Replacement..Page 2-29
;)
For the Panasonic DP-8016/DP-8020 series, Panasonic sent out some machines with a crack on the SC PWB, Memory full when using ADF,
is the system, I had one with the same problem out of the box.
What is the Subnet of the Bizhub ?
Have about 10 of these C350 Machines out that I take care of..
THEY ARE GREAT MACHINES....Right price for CSP...
Have 1 machine at 750K with little problems !!
Just Sent a Service Manual to you !!:)
I have the same problem with a C250..I accidently pulled the cord out of the wall moving the machine....and now have a hour glass on display for 15 seconds, then goes blank...
I am trying to get...
This Code is again the Toner Density Sensor being to low, but as stated above...Dev and Drum need changed....when it says this...of course the F8 developer mode calibrates the developer / toner...
:)
My KM Page works fine....so does that add porlet page...
When you log in...next to the "Logout" button is a "pencil" which is the "EDIT" button..click it...then go to the portlet page for...
Thanks for the Response....:)
20lb is being used for the 11 x 17 paper....
Paper is fine...
This problem has occured at 2 different customers locations with this machine...We ended up...
Amen,
“Time is passing. Yet, for the United States of America, there will be no forgetting September the 11th. We will remember every rescuer who died in honor. We will remember every family that...
Just emailed you the Kyocera KM2530, 3530 Service Manual..:)
We are a Konica Minolta Dealer...
but I get help from Imagistics machines from
1-509-575-0734..in Yakima Washington...
Ask for Mark Gibson..maybe they can help !!
Tell him Jerry in...
Any one had a Wrinkling problem with a M24 Color Copier....Changed a new fuser, still has wrinkling, SOMETIMES....
Letter or Legal...does not matter....Duplex seemd to be the most problem..but...
Why not an put the "Location" of your TECH WANTED ADS in the subject line so techs do not have to ask a reply back....where the Tech position is ? :p :)
Did you do a firmware upgrade with the new Fuser and reset a new Sim setting for the new fuser...
Can't remember the Sim # as I am not near a manual or machine at the moment...
Just sent you a Konica 7065 Service Manual:) :)
Tech Support said not available for this manual...:(
What do you need to know...I have a contact who has a manual from where I used to work...:D
Where is the creasing...on the trailing edge how far ?
I have seen where it is the Original size cover switch ...Do not have any of those machines in the field or Manual....
I used to work on those Analog machines...I checked the KonicaMinolta Service Web Site.....with no service Manual listed....:mad:
I emailed Tech Support about it...
:)
Been with Minolta 10 years, Trained on Konica Minolta, Kyocera Mita, Xerox, Panasonic, Brother Fax, Sharp Fax, Risographs, FP Mailing Equipment, Fiery Controllers,All Printers. ..A+, N+...
Simulation 96 reset Codes on this machine...